Ollieh17

ignition coil on bulkhead. check all wiring to it etc

wont be because of the air filter

sounds like it could be a coil issue

If your still running a standard ecu, these things run rich from factory, if that's the case, turn the fpr down and keep adjusting till you get it right 👍🏻

Not that rich lol...they should idle around 14-15 with correct fuel pressure

Foam for strength is a thing. Not sure id go to that length though. Cage should be more than enough really.

Sounds like a cv

15-40 will only make a difference when cold. You want to run a 50 or 60. Not that thicker oil is the best way to solve an issue

Easy. Like 4 or 5 bolts. Just get stuck in and all will be obvious

A fair few early 90s turbo hatchbacks out there. All got something going for them. That's why I find it strange so many people come back when theres so many other cars to try. Just my opinion

Hoses off engine to heater matrix

Cool car, actually think the kit suits it. Era correct.

It will be very obvious the difference

Don't assume just because a car is a fresh import its a better car than one thats been in the UK for a while. Also mileage isn't always a good indicator to go on. Rough starlets can have strong engines and vice versa. Mine was bought off a infamous seller on here, loads of cars had issues from him but mine had a strong engine. Important thing is you weigh up whats worth more, clean shell, good engine etc unless something ticks all the boxes!

Import papers aren't really that important, they arent a definite indication of the cars actual mileage

ID workz do a 19 to 16mm 90degree hose

Avoid anything from high Wycombe!

Probably tried their 'car doesn't sell at this price, so let's put it up and see if it sells'

Just like the charade they have

Plus they'll get alot more money out of you for a ct9 hybrid! I'd vote tf035

If you actually read it right it was 20k between two starlets lol..

Well actually it's not that clear...

20k on a starlet is outrageous to start with lol

If you want custom can recommend fusion fabrications. Did an amazing job on my charade turbo kit. One off and less than a off the shelf starlet kit!

I'd wait and get a wepr he may have a kit ready to go. Worth asking. Have seen a few cracked td manifolds recently

There's no make your own decision about this. The bad feedback is awful. Why would you even risk it happening to you

What's the spec of your glanza? Even in that 240 will appreciate a hell of a lot faster than a glanza (if starlets ever will that much). Depends if you are in it for a car you like or the money

Yeah if anyone needs pictures etc of my engine n fake parts etc I'll be keeping them for evedence also. I might try and get someone to check if it's real or not (wastegate)

Turbosmart one?

Try shippy, check a trade etc. Also check out angry parrot on facebook. He may be able to help as has a flat bed.

Just recommended hI'm for welding gas too