Jump to content

starletezy

Member
 View Profile  See their activity

  • Content Count

    1349

  • Joined

  • Last visited

 Content Type 

Everything posted by starletezy

  1. starletezy
    Seen some feedback in the past about Meister people were saying there a smooth ride
  2. starletezy
    Meister for road use BC for track use
  3. starletezy
    One lucky lad
  4. starletezy
    60mm on an ACIS would love to see the results on this!
  5. starletezy
    ^
  6. starletezy
    Coilovers are not cheap personally I would go for BC or Meister . I have heard you can adapt coilovers from an vw polo to go on the starlet think there's a thread here somewhere
  7. starletezy
    Porting the original manifold is all ways good if your going after market I would go WEPR as above spot on service and the quality of the work is flawless. Tuning developments manifolds are good mate
  8. starletezy
    No I wouldnt run it could kill your engine mate best bet is to get the mapper to install it and then map it there
  9. starletezy
    Have you fitted an fuel cut defender before upping the boost? if you haven't your hitting fuel cut anything above factory boost setting your car will cut
  10. starletezy
    What mods are you running and what turbo?
  11. starletezy
    Best off giving it a good weld cant fault WEPR but have noticed on there screamer pipes the welds are a bit too thin
  12. starletezy
    ^ Had my WEPR screamer do the exact same nice thick weld will sort that
  13. starletezy
    Would look better without them stickers
  14. starletezy
    If your looking for a ct9 hybrid get it from speed division best way
  15. starletezy
    As above
  16. starletezy
    ^
  17. starletezy
    Yeah that sounds like the right symptoms of oil seals wouldnt recommend changing the seals your self as the turbo will need a full rebuild in order to change them would just swap it out for an hybrid
  18. starletezy
    Exactly what I was thinking
  19. starletezy
    Im running pro sports there spot on if you ask me
  20. starletezy
    K20 in an ep = flying machine
  21. starletezy
  22. starletezy
    Update cage stubs welded painted and fitted
  23. starletezy
    That is an absolute steal!
  24. starletezy
    Yeah it will boost obviously without an map also check your actuator is holding the wastegate closed not open
  25. starletezy
    Have a look at pro sports then mate
×
×
  • Create New...