Maxep

Hi, has anyone by any chance fitted these bucket seats in a glanza ? I can't seem to find these locally, so before ordering from abroad I wanted to check if someone fitted these in their glanza. Not sure if these will fit such a small car to be honest Appreciate any feedback !

Running a td04 on 1 bar with stock injectors. Should be fine for the power you're looking for.

Mine started slipping immediately on the standard clutch. Went with the Helix paddle clutch, not bad at all for daily use.

If I were you I'd get an fpr just to be safe. Plus if you do you can run it on 1bar boost. Obviously need an FCD for that. Been running with this setup for a while now myself. :)

Got a SARD one if you're interested :)

These look similar. http://www.rotashop.co.uk/rota-grid-max_c33741_23819163.htm

Also had an NA box in my glanza, shorter gears for sure, but revs were just fine.

I personally use a Helix sprung paddle clutch and found it to be fine for road use. I know for sure that some people over here use it for 300bhp+ .

Don't think you will really feel that big of a difference, unless you dyno it and see the numbers . But yeah as the others said, up it to 1bar and see that it's fueling good. Also if you're going to up the boost, you'll probably need a bigger intercooler. I ran a td04 for a while on a P&P (Sard) and it fueled perfectly, only removed it because of the 8500 rev limit..

Own an 8k9 glanza myself mate, love the colour. Good luck with the sale! FreeBump!

Hi, Have you still got a set for the glanza V in black?

As the title says, looking for some injectors for my setup

Have a Sard one up for grabs, all seals still intact Edit - Didn't notice you own a GT, sorry mine is for it's relative Glanza

Have the same kit and mine is close as well, just ended up wrapping the screamer in heat wrap.

Looks good guys, wish I was located in the UK to carry this out on my ep

Revved mine plenty of times to 8.5k with a P&P ecu, still goin strong .

Get different brackets

The most important one is a boost gauge, if you're boosted. I personally have a boost gauge and an afr gauge to monitor my fueling. As for brands, I'd say AEM, but there are plenty more.

Thanks for the tips, Yep you're right. I tried the towel before actually claying/polishing it and gave it up immediately. Will give it another go once it's done. Also good tip on the water, will def try it. Thanks for your time man, appreciate it.

Looks good man !

If I may ask, is that a civic lip up front?

Hi mate, Really enjoying the tips. What products do you recommend for blue/purplish (8k9) glanza ? I personally just use dodojuice products and find them very good, but open to alternatives Also when washing a car, I bought a dodojuice drying towel, but it left a lot of microfiber left overs on the paint and it really wasn't enough to dry the car. I also tried another towel from Mothers, it didn't leave anything behind, but it still wasn't enough to dry the car. Would appreciate any suggestions . Cheers

This or internal wastegate