goldenvtr

vf35 forged 5e, rrfpr at 4.2bar 330 injectors, safc2 . i make 242bhp and 214ibft at 12psi ive done 4 trackdays with this setup but im booked for jan to have my standalone mapped steady high 11s afr i have roughly 10-13% trim across the rev range on the safc with a base timing of 7deg - crude but works. also don't use an fcd and for the sake of £130 id buy a wideband!

anyone got one lying about from a GT or Glanza or paseo? dosn't matter if ther different as im fabricating something up but need the main part that the bottle slide into

22 or 24mm?

Few laps from the open pitlane trackday last sunday plenty more footage i need to edit, over 4hours lol

So i did an open pitlane at donington last sunay, i've got over 4hours to edit, but was excited to get these few back to back hot laps uploaded

ye just some poundland stuff lol seems to have worked well but was messy/inaccurate, ill be using a brush on fabric adhesive next time but the spray has its use

ill take better photos when i redo all the black suede

i'll take photos during when i do it, probably be in a couple of weeks after my next trackday ive done a trial run with some cheap grey suede and looks good, im going with black no ive practiced lol ill post couple of photos.

anyone done this on an ep82 and have some photos during? before i ruin my roof im wondering what i've got to work with...does the roof lining have a skin or is it attached via glue etc? any input will be helpfull ive already done my door cards and a pillars in suede as some praxtice and want to do the roof to match

pm'd

ive got a tom's fcd - same as the jam type, let me know if pat dosnt sort you out

might be down you way in couple of weeks, will take the box if i do.

how many miles on the box and is it s c52 or c56?

bump

i had an is200 wheel in my old paseo, looked right at home in there

Any one got any they didn't need or use before i buy new? only want genuine and unopend

put these "hot laps" side by side to compare my 273bhp mx5 and 242bhp starlet similar power to weight, and all round performance take around 6 months apart https://www.youtube.com/watch?v=XIZPiGSVH68

cheers mate, i'm running a recirc bov, vents from the cold side back into the inlet, on the road it make no difference but on track it defiantly get back into boost faster if you shift quick enough ive got a few more camera mounts to try i made a pretty cool removal bracket: that mounts to the interior light, ill get a photo this week:) just uploading another vid to youtube too.

not sure but there might be a guy bringing them back with enough demand

what is the bolt mounting spacing on the clio calipers i believe the GT is 128mm centre to centre on the carriers for the effort may aswell get wilwoods

wish id kept my mouth shut on youtube lol i let me secret out, been using these and laughing at the astra discs with "skimming" since around 2005 lol

my 2 sessions from Trax 10am raining low boost 8/9psi and 13:40 dry 12psi 242bhp https://www.youtube.com/watch?v=MU7WDduQfhY https://www.youtube.com/watch?v=7d_NZI1FkaI&feature=youtu.be

thanks dude, cant wait till i fit the link ecu, k20 coils and get a proper map thanks for your input, im glad i tried out the vf35 pretty sure this is almost identical to a vf28, which i have tried and was VERY good, i think its near identical in performance to the vf35 tbf but im done swapping turbos for now lol on a side note when i had my turbos on the bench i tried the spare p18 housing from my damaged vf28 on the vf35 core and it fits, i believe this would make it into a vf30? but the vf35 had a newer/better bearing design, the p20 housing on my td05 20g is noticeably bigger, and lag is ghay but i recon it made around 260/270 at 12psi cant confirm that though

Forgot to update this I've got the spool even better now. Hits 12psi at 3400. Need to upload the new datalog Took it for a power run too. Made 242bhp (206whp) and 214ibft at 12psi with the vf35 but power drops off at 6300. Think this is due to weak valve springs. So there getting changed as soon as I get a day off work. Done 2 trackdays already with this setup and it's great. Will be even better when stand alone ecu goes in https://flic.kr/p/Y4bmG8