Jump to content

TD04GT

Member
  • Content Count

    31
  • Joined

  • Last visited

Everything posted by TD04GT

  1. I wrapped my full buddyclub for my GT as well, bit of a pain as it's sleeved with springs and you can't really wrap round that lol. I think I bought 2 x 10m rolls but don't think I used it all either.
  2. Thanks for the advice lads. I think I'll send the hubs and discs along together to have them lathe'd and spigot rings made up then.
  3. I've seen many posts saying you need spigot rings to centre the astra discs used on a levin twin pot setup, does anyone actually know the specs or sizes of the spigot rings? If I was to bore the inside face of the discs which fit over the hub to within 0.5mm of the diameter for a snug fit, would this make the spigot rings unnecessary?
  4. Chancing my arm for a decent second hand one before I buy new as I'm in no rush. Will keep in mind thanks though.
  5. After a v-band one if there's any out there for sale.
  6. G6r gearbox here with bell housing swap done if you're interested.
  7. TD04GT

    4efte clutch

    Im after a healthy Blitz or Orc clutch with release bearing..May also consider os giken. Pm if you have one or could have one for sale soon, no immediate rush. Thanks
  8. Bought a speedo convertor off Trev and it arrived within 2 days well packaged and with a free trd sticker
  9. Still looking if anyone has one.
  10. As title says, after the alloy mount. Rubber or poly bush.
  11. I think your bang on there, the fact your blowing more air could cause a weak actuator to fail.
  12. You can make them up for about twenty quid off ebay
  13. Pm me Bean you can't get any more messages. I've a g6r 6 speed box with the bell housing converted.
  14. I've a 5e block for sale if you haven't one of those already
  15. Another vote for wepr. Their work is second to none
  16. On my gt with 15" wheels and stock rpm limit I get about 40 in first, 65 second, 90 third and fourth is off the clock so I don't know exactly - can't honestly remember if it hits speed cut before the limiter. It does get there very quick though.
  17. There's a fujitsubo power getter on the Facebook selling sites for good money
  18. Usually a difference of 15psi / 1bar between cylinders indicates a problem in that cylinder, your second test shows that in 1 & 4. Do a leak down test on it and see if it changes the results
  19. TD04GT

    C pillar brace

    Civic ones on ebay fitted my gt without modifying anything. Bolted straight up.
  20. TD04GT

    Stock 4EFTE Engine

    Newly rebuilt engine for sale on the Facebook selling pages
  21. Have you a part number for the seal as mine is leaking out the dizzy now too
×
×
  • Create New...