Jump to content

DevonGT

Member
  • Content Count

    1139
  • Joined

  • Last visited

Everything posted by DevonGT

  1. Black will be ok then. You don't need to run a 1bar spring to run 1bar of boost. If you don't have an EBC, black+red.
  2. Just black. With that you'll be able run 1bar and have a lower setting of 0.6bar if you wanted to. If you have an EBC.
  3. If your not planning on going any higher in the near future and you bought the wastegate recently, I would go with a black spring.
  4. Are you planning on running just 1bar of boost?
  5. Not seen one that colour down here. Sure it wasn't a Micra?
  6. When i had the ep82, I bought a PFC and the boost control kit from them and they were spot on.
  7. Used them a few years ago. Found them to be really good, stuff arrived quickly and paid no duty.
  8. 1.1-1.2bar, anymore then that and the turbo won't last long. They shit themselves over 1.4bar.
  9. Personally i wouldn't bother mate, to many unknowns and lack of basic information.
  10. You can't, unless you make up your own bracket. There's a screw you can use to adjust the idle if need be on the TB I think.
  11. The vf24 would be the closest to a td04, but even that would spool around 500rpm later.
  12. If your only going to run 1bar, you'd be better off with some sort of ct9 hybrid.
  13. DevonGT

    HID'S

    I have these - http://www.ebay.co.uk/itm/35W-HID-Bi-Xenon-Conversion-Kit-H4-3-Hi-Lo-Light-Bulb-6000K/170864603848?_trksid=p5197.m1992&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D14%26meid%3D8379466529437489897%26pid%3D100015%26prg%3D1006%26rk%3D1%26sd%3D170864603848%26
  14. £8 to get in, parking should be ok I would have thought.
  15. I doubt it, Honda's don't do torque.
  16. I'll be at this and have a few parts with me I don't need.
  17. http://www.ukstarletowners.com/topic/66094-group-buy-ep91-ep82-extension-harnesses/
  18. Just get it checked on a rolling road.
  19. I'll be at Auto sport and modified mania.
×
×
  • Create New...