james@cjperformance

Sit in thd car with it on idle and in neutral. is the noise present? If yes push the clutch pedal down. does the noise go away of yes the im 99% sure its the release bearing

Not really alot you can do apart from take it back to get the issue resolved. Not as if there willing to do anything about it

Iirc 2000 is code for im fucked and need replacing as my owner didnt know my code

Sound like the release bearing to me. bang a new clutch in while your at it save you pullong the box off again

Garage door opener you need then you wont need a detector

Mocal inline stats open at 80 degrees when using an inline stat you need to fill your cooler core with oil prior to fittong to allow for the pressure drop when the thermo opens for the.first time. @ wallace you jave this problem as you run a.sanwich plate which requires it to be slightly open at all times which inturn allows oil to return to the engine if it closed your engine would.be starved of oil. just out of interest do you have an oilpressure guage if so what does it read on idle as i was under the impression that sandwich plated hamper the oil pressure as they are sort of half open

Id think it would dude when you upgrade your software it does the browser too. id change over to opera best browser for the mac imo

Is your browser set to not remember passwords.mine ised to do it until i re installed firefox on my mac. get rid of safaei ita shite anyway

Seems their customer service is non existant. they dis not reply to my email about purchasing 20 clutches from them

Use parcelmonkey.co.uk ive shipped loads of stuff abroad just make sure you do it by the book. i send parta to the states on a monthly basis and have never had a problem and that is with paypal

price on front hubs please

What are you doing with that race tank?

Ill come in my jeep lol if local. where you thinking

The heater matrix has a bypass for when the heaters are off. it will use the same bypass if it is blocked. do as philpott mentioned blow some air through it to unblock it flush the whole system and renew

You sir are mental. apart from tje failure how did they hold up. Oh and can i buy your.bonnet

Alluminium is though the floor atm. are they fte manifolds? If so ill take them from you

I have a flaring tool here if you need it and think i have a few spare fittings too. you will just need a roll of copper brake line to finish her off

im talking to a few companys about these and hope to have something ready for the end of the month ;)

Ttt

green with polished alloy bits ;)

ive updated the thread with a poll, as there are so many colour options available i need to see what the majorithy want as obviously its not ideal to have loads of options with it. ;)

I will if i can get hold of one to use

Ollie they will be a 5 piece set so yeah they will cover the exhaust tunnel. I can get them made pretty much how i want them hense the thread to see what people want

Right thrn ive had a request to get some oem style mats made up. Would there be any interest in them they would be branded cjperformance price wise we would probably get them out for around 35-40 any interest or colour request please let me know

I use both halfrauds and snap on every day of the week there is notjing wrong with then. @ G snap on have the same policy with there lifetime guaranteee if the item is servicable and said servicable part breaks you are left to foot the bill. halfrauds are also the same To anyone looking to but this set i have yet to crack or snap any tool in the set i have here and they take one hell of a beating.