Jae-Glanza

Can't help you with different exhaust but if you change yours i'll buy your TRD =]

Very much doubt he's even joining the force tbh!, Just part of the scam. A cover story to make him sound a little more trustworthy. Glad you've gotten this sorted mick, see, you should of given it to me on finance, could of had it straight back then ;p pahaa =]

I smell bullshittttttttt =]

Should be a good 10 of us then? =]

I need some 10mm ones for the rear myself! where's the best place? If i don't get done for having illegal spacers, i'll only get arrested for my starlet looking shit with the wheels tucked so far in ;p =]

INTERPRO: 1- 2- 3- 4- 5- POWERSTATION: 1- 2- 3- 4- 5- TSR: 1-Starlet 88 2-Stulet GT 3-Brad L 4-Jae-Glanza 5-Daz_rt 6-Dan GT (Friend who isnt signed up on here) PERFORMANCE3000: 1-Nayls

I'd love a white quadlight gt! looks amazing and the power is darn impressive! good work mate

=]

Why would APEXI do this gauge for £30.00 odd quid FROM CHINA http://cgi.ebay.co.uk/APEXI-AUTO-BOOST-GAU...0#ht_2828wt_939 and then this 1? £125,00 http://cgi.ebay.co.uk/Meter-Gauge-APEXi-BO...#ht_1638wt_1165 If that top one's real, i'll eat my glanza. Arsey tit.

They'll be fakes mate, Plenty of fakes knocking about =]

I'll be fitting mine in the next couple of days so will give you the heads up, i'm a bit unsure to what vacuum line myself though atm. Blitz/Apexi/Hks etc do good accurate gauge's but there a pain in the arse to get hold of and i don't fancy paying over £80 for a boost gauge when the £25.00 autogauge one's do the job =] I've just ordered a smoked autogauge one mate =]

It is lowered, on Tein +10mm springs LOL, Who ever said those springs lower by 50mm or something lol.. You mean, my starlet that was full of car parts ASWELL as 3 grown men didn't out-sprint your clio 1-7-POO which had just you in there ;p I'd love to go again sometime as you were struggling to get away darling =] pahaaa Get your name down for the south-west rolling road pal.

Spark the Wheels are going black mate, There only cheapy wheels tbh so going to do them black and use them all the shitty months and eventually source some proper wheels, Volk etc Silver Glanza - Yea they are similar indeed lol, Going to have do a few things to make them a bit different from eachother i think mate! haha. I'll keep an eye on your project log

Since my alloys are off being painted, I'm rolling on steelies for the meantime. :harhar: I must say, I've stopped at traffic lights on a few occasions and noticed 'boy racers' glancing over looking at my 'steelies'(as you do).. There even more puzzled when my 'Micra with a bodykit' out-sprints there big 2.0L. bit of a sleeper until you see the front ;)

Count me in for TSR, local and pretty good price =] INTERPRO: 1- 2- 3- 4- 5- POWERSTATION: 1- 2- 3- 4- 5- TSR: 1-Starlet 88 2-Stulet GT 3-Brad L 4-Jae-Glanza 5- PERFORMANCE3000: 1-Nayls

I have the autobahn fmic and i've barely cut my bumper, Only the bit behind the number plate really =] check my project log for pics.

Assuming were talking about petrol filler caps, mine also sounds like i'm opening a fizzy bottle of pop when i unscrew it, surely not all of our charcoal sensors job's are broken? ;o

I'm running same setup but havent fitted my mani/decat yet and i have an hks actuator, From what i can gather, i'll be fine running that setup without fuel cut aslong as i adjust the boost to suit.. (lower the boost using hks actuator) However, you haven't got an actuator yet so you if you install your mani/decat before you get one and your hitting fuel cut, might be worth in getting one of those cheap ebay 'manual boost controllers' that sit on the vacuum line to decrease it etc, Havent used on my self but thought it might be handy as a temporary fix untill a adjustable actuator pops up mat

Yea, i'll be going hybrid in the near future =]

Nah, My turbo never needed doing, i only got a quote out of interest mate. If i had to replace my turbo, i'd get a low milage second hand one or hybrid for sure!

I know i didnt mean it was a hard job, i just meant it's pointless IF it's not really doing anything =]

I got a quote for a rebuild on a ct9, They emailed back saying a standard overhaul would be £295.00 plus vat. Your better of paying a bit extra and getting a ct9 hybrid or Saving yourself shed loads and buying a decent 2nd hand ct9 in the region of £100.00 mate!

I've just relocated my air filter to behind the grill, so my 'sensor' is just in around the engine bay also! After seeing this thread i did a little search and most of the chaps on here have tucked there's up in the engine bay saying it doesn't do anything anyway! So i'm just going to make sure mines tucked up nicely not in the way and leave it. So stick the kettle back on and save your self some time mate, Fitting that to an alloy pipe is going to be a pain in your arse! =]

Thank's chaps, glad it didn't take long to get there. I try wrap them well, maybe over wrap them in some cases but i'd rather be safe than sorry and avoid have something get damaged in the post! Pleasure doing business with you both!

Yea i would have suggested a leak tbh, was like that fitting mine. When i fitted the fmic the turbo was stupidly loud, Got some new clips and now the turbo's a lot quieter, about the same as when i had the tmic luke. =]