lukEp

lol someones looking forward to showing there car off

rx8 club: 1) Jang + Maz 350z club: 1) Clarkie34 (provisionally) 2) Digsy (provisionally) 3) Marzman (hopefully not!!!) 4) Stu_350z 5) eraserhead 6) Nik397 mx5 nutz.com: 1) Digsy 2) mattpc 3)Daz (maybe) come on you know you want to! haha 4)howard + plus some other jap cars supra club: 1) Markoos 2)Matt H (maybe) 3)Tooley 4)Jake supra (maybe) mr2 club: 1) Markoos 2)MARTINROBINSON (Maybe) 3) vc_1985 mr2 tubby 4) Type R 5) evo 6)Scoody 7)Scooby 8)Glanza 9)Starlet UKSC: 1)cheshireglanza 2)Markoos 3)Craig_N 4)DavidAshton 5)Rickstar 6)lukEp + chris 7)Batmanglanza 8)Newbe 9) Kennedy (poss

Same here just fitted autobann fmic and had to cut two small bits off the bottom of bumper for pipes and bit behind number plate but that was just to aid cooling and so I can show off the fmic as it's nice and shiney!

arrrrrrr do they not have were there from on the avitar

i have ngk leads well better than standard but i'm biased as i've only had standard and ngk leads

agreed sorry dan

i thought there were only me you and mark from manchester off ere mate lol some people are traveling from well far though good on ya lads

what petrol that guy runs that thing on fumes lol

wasn't me my glanza is silver lol

i'm sure if its pissing it down we can go take over the trafford center parking bit underneath

u cant trust the weather man he lies

look what i missed

I've converted from an auto which only had 4gears so its a big difference from that but never drove a 5speed hard so not sure what the difference is mate @phil

EP82 GT Turbo 1. Gary_ep91 (silver) 2.Armand (Black) 3.Galliano (Green) 4.Jade_Star (silver) 5.Paul Sr (Black) 6. Nanglebadger 7.phil0694 (black) 8.Mark Glanza V (black) 9.badassracer69 (black) 10.GTPHAYER (black) 11.BAZ2CRAZY (black) 12. Mimtu (Black) 13. Mimtu (White) 14.Brewin (silver) quadlight pref. 15. JackStar (black) square lamp if poss 16. Bluebear (Black) Quadlamp 17. Liam_D (White) 18. Alexgtadv (black&grey) quadlamp advance 19. The_Notorious_C_A_T (green square lamp) 20.chr15_7_t_(black) 21. lilmiss (Silver) 22. starletjosh (black) quadlamp 23. greggt (black quadlight) 24. Seb

no it needs to vent to air or it will cause a vacuum in the tank again

the purge valve is there to open the charcoal filter to suck the vapore into the inlet and to get burn so it not released into the air if your tank sucks in air when you open it it means it not venting something is wrong the only way the air is suposed to vent is through that filter so its got to be the valve is faulty or the filter is blocked.

ratio are very close and the box is out of a corolla G6 1.3 or G6R 1.6 the 1.6 needs a differnt bellhousing for it to fit but will worth the effort when its fitted

intake temp sensor it in the front of the inlet mani i'll geta pic later to point it out it more on the driver side

it means the purge valve isnt working or the charcoal filter is blocked its a black plastic cylinder onthe bulk head on the passengers side under the bonnet about the size of a tin of beans just disconnect the bigger pipe that comes from under the car as there are two and it will stop vacuuming.

thats the standard shitty toyota actuator there wank!

fitting the fmic will lower the boost slightly so prob even it self out

dont leave the pipes disconnected in the engine bay block them off or plug the valve back in, if you leave it disconected it will cause problems

its the n/a which have a air temp sensor there the turbos have it on the mani

That sensor, is not a sensor! its a perge valve for the charcoal filter which basicly stops the fumes from the fuel tank going to atmosfear its not important and it wont make you use more fuel. I binned my charcoal filter as it wasnt working. Basicly causing a vacuum in my fuel tank, when i went to open the filler cap loads of air sucked in!

thanks jae got the bov/efi adapter this morning well packaged and sent recorded