TurboTobz

^ x2

Woodruff key, I could grab one off the snapped crank in my garage of you REALLY stuck but at the moment I have around a 1 foot square patch of space due to my furniture from a move two week back.

It'll make the ass high and front low, could just swap them for the purposes of the mot

This is the best i can do I have a few bulbs out at the moment... T5 bulbs for the lights for warnings etc along the bottom row, can get them from most motor stores they cost well under a pound!

Thanks!!!

If what the box says is correct (h4) then yeah they will, also h/l means you get a full beam as well (some kits leave you with just a main).

Where'd you get the blue wheel nuts from on your gt thread mate, I'm after a similar set didn't know which ones to trust for quality?

Skim head, replace stems, headbolts, gasket kit, water pump new belts would be a good start

Yeah, lost my job so I couldnt afford the work that the k24 needed unfortunately! I'm after a lot there's not many things on my car at the moment I'm 100% satisfied with to be honest lol! I got bits to get me by but not permanent spec if you catch my drift!

They are indeed power flex by the looks of things

Would be epic if you can find out for me I ask him every now and then but I think he forgets what he does and doesn't have haha. I wanted my car to look like the k24 did as much as possible miss it like crazy! Looked really nice with sumopower sunstrip and the buddy clubs on it etc! I sold it to pig666eon and then brought a forged lump thats thrown a crank, so I need a set of rings and 1x pauter rod sent over from usa and then I can grab a crank and block and begin the building lol!

Any ideas what he has left dude I'm on the lookout for a few bits! Shame, a few months back I had a livesports spoiler in this colour but sold it! Would have looked mint on this!

blitz super sound, needs a polish and tigging onto my intercooler pipe work. Started decluttering today, ran out of insulation tape do I've left a further 5 ish more plugs and wire I need to reduce back to the loom. Also thought my oil return was looking a little bit sketchy so had that off and adjusted it and checked it over just to be on the safe side. Started making my mounts so I can lower the rad an inch or so and loose the cable ties, but my garage is like aladins cave at the moment and I can only find my battery drill which needed a lengthy charge so I couldn't drill out the spot welds on the oem right hand rad mount to remove it. Also had a toy with flipping my intercooler but at the moment the wastegates in the way of my rad which i need to move to the centre more to get the intercooler pipe to run next to the rad rather than taking the long route around and under the car and mounting the intercooler flipped also looks to be an issue, so I'll take it a step at a time and try once I've put the wepr kit on. If I can I may fit some aero catches and try and do something with the slam panel as i really want the rad and intercooler in a more permanent place.

Thought so and I guessed that haha! Anything else you got from it?! All I have lefts the Cusco LSD box, standard diff and the tiny jap sumopower front number plate lol oh and the old facelift bumper mikey had on it with side exit hole sat in my garage lol!

Like the dials look very similar to mine I have at the mo', they look familiar but can't remember are they the ones from mikeys car? Lol

Black box mate most airlines if not all run them

Ouch! I know they can be picked up for 1-150~ on eBay usually, I've missed the last 3-4 because i've been skint lol.

Cheers missed a cheap one in immaculate condition on eBay for only £70!!!

I was being sarcastic hinting you should get rid of it to sell it to me lol. E01's are my favriote controller! Been seriously after one for months!!!

Vinyl wrapping can look pretty damn good if done well, and can fool a lot into thinking its painted I had my glanza wrapped back in the winter from tired silver to brilliant white! I have loads of pictures if your interested to see the outcome or look at my build thread 'Toby's 96 project' I can also put you in touch with the lad that done it. I'm not a massive fan of the carbon wrap the only time ive been hugely impressed was an is200 in white carbon wrap and it looked pretty nuts!

Ah doubtfully then!

I think 50/50 sometimes I really crave one others I think better without either way it Definately looks good!

Wonder if they're originally my old ones sold on eBay by some one else a several months ago. They were real nice seats

Nlt blue and black are they?

Now your just being silly! Lol