Jump to content

TurboTobz

Member
  • Content Count

    3964
  • Joined

  • Last visited

Everything posted by TurboTobz

  1. But having an fpr will aid the mapping and adjustment if your going to go with the emanage so either way that's a worthy purchase
  2. Some one down this way has a leon like that red one same wheels only its sprayed cadbury purple
  3. Around 2.4bar standard pressure I think so should be good
  4. If not ebay or post in wanted section turbo shouldn't cost fast over 60-80£ in good condition
  5. Then you need to weld the penny a new manifold and a gate
  6. This manifolds for a external gate. Youd need gaskets (new) Manifold Decat Oil feed External wastegate if you chose to run one Civic sized rad Slimline fan Water lines (optional most don't) Some hose that can withstand oil and high temps for oil return line There's a rough list
  7. That's normal enough. To truly know if it's actually over fuelling it needs to be put on wideband your nose is not accurate lol
  8. If he takes manifold jamie knows ill take blower and gate And oil feed
  9. Ahhh The cox is called ben, the lad on the course up Newcastle called Kev.
  10. A video maybe handy could be just condensation
  11. Check pipework or see if the bov if ypu have ones been spewing oil out. Could well be piston ring related unfourtunately Blue shows burning oil White burning water They will blow a bit of smoke in the cold weather this is condensation related. Has it lost any oil?
  12. my pals just gone to siemens done a short course up in newcastle and is out on the farm, others a coxswain for the pilot boats out there. You in ramsghetto much? Surprised you haven't seen me about!
  13. Lifespan of sensor due to exhaust gas temps doubt you'll notice much difference as your not overly close the the heat source. The bosch sensor makes up 50-60% of the costs of most kits they're not exactly cheap but I really doubt you'll see much difference in lifespan
  14. that blue ones a dog lol you working on the offshore out there? A few of my pals do I also work in ramsgate. James welcome to the forum bud you should see my car again soon!
  15. I have the climate control lined up zeldoz, would be interested in the dash loom to make life easier may need stalks too for these can't remember
  16. TurboTobz

    td04 manifold

    Sacha who owns wepr Wickedep on here speak with him worked out cheaper to buy new for me check my build thread the manifolds pretty amazing.
  17. Gotta agree, some of these look mega euro, the ones that don't are big in your face rivet on arches, imagine some massive ones like the 180/200sx and evo's get... The ones that take over some of the rear quarter look immense, but on a hatch am not sure it'd suit, would love to see it done though.
×
×
  • Create New...