The Toffinator

Yeh just had a look into that, heard its a faff on though.

Yeh i was just thinkin that, booo. and im not sure dude, was facing out in a corner and i just popped the bonnet, next time im down i will have a skeg if its not crushed. was a complete car

Got a relative who has ties with a scrapyard, and when i was last down there was a mint looking 7AFE in a corolla, they have a smart looking exhaust mani, do these fit the 4EFE? i know the lentghs will be off, but i will just get an exhaust made up from that. Thanks

Get some rims on it, some cheap lowering springs and it will be spot on! i couldnt believe how clean it was, Get a build thread up

You tried filling the throttle body with carb cleaner? just give it a blast through that will mabye sort it?

Rota grids in bronze!!

I have never had a problem with it though? its for brake assembly, and plus i used silicone based grease and a few other ones (we have loads at the garage) and they end up melting away!

If you dont fancy popping the piston out, you can just pump it out pretty far and get cleaning under the seal, then same again pack it with copper grease and push the piston in and out a few times with a G-clamp. i did that on my other one because i cba taking it out lol. works fine!

Sparky im sure most of the the cars people are on about here have been daft pulls from the lights, motorways etc. but im sure nobodys stupid on here...

Is that right? will have to check the part numbers on my calipers, or it may be the same caliper, but with a different caliper bracket. will see. and dude that would be perfect, Pmed you

Comeon guys...

When i have this problem, i remove the sliders, and clean it out best as possible, pack it with copper grease, and that usually does the trick. if not it will be the main piston, either corroded or dry that gets stuck as the brake heats up. If the pads have been low, the piston will have been stuck out far, and mabye corroded behind, and now its been pushed back with better pads, it starts sticking. if so just pop the piston out and clean it up, the seal also comes out, this is clipped in. That will sort your problem dude.

Yeh i agree with that aspect, we should all fight for what we see is right, but when certain religions are causing a great deal of conflict over silly things,(land, right etc) that can cause wars, surely its a step too far, and doing everything you can to show your faith in terrorism etc? we should all express our beliefs, but there is definetelty a step too far! But as you said, i doubt it will ever be stopped

Agreed ryan, but its truth, conflict begins by people disagreeing, and alot of the heavy stuff is because of religion, but the thing is is rarely gets sorted without something big happening, because people beleieve that strongly, and are born into there beliefs so its a constant problem

Ryan thats brilliant stuff there mate! dont mean to offend but i HATE the corruptness in religion, its always underlying no matter what religion it is! drives people too fight and not get along, when religion is usually aimed towards peace??

Probaly the first time its ever been to the redline lol

Looks mint, as above cant wait to see what you do with it! and i didnt realize the ep85s had the 100hp engine either! thats mint! Bet they sound awesome lightly tuned

Looks beaut dude! plans for the interior sound promising, DIBS on the 98 spec seats though!! And lol about the parcel, i had the same thing when i got the wheels, couldnt unwrap them

Yeeees! this is going to be an animal

IG in the diagnostics box dude, easy And lol you really need to look at where your posting topics

Looks like a clean little beasty! get them mods on it

1. YoungStig EP91 N/A 2. JonnyGt EP91 SR 3. John ^ Dad Ep91 N/A 4. Yazzii (my g/f EP82) 5. Iam a leg end EP82 6. chrissy cee ep91 Glanza Hartleepool 1. Usher EP8 2. Nismo Micra EP82 3SGT 3. JonnySi EP91 4. Dean-Dak EP91 (technically not hartlepool but close enough) 5. kdowg ep91 Newcastle 1. scottyglanza 2. jkgt ep82 3. toodles 4. Ep91_glanza(karlo)<<< Middlesbough 1.jeppo (facebook liam jepson)(glanza) 2.The Toffinator Newton Aycliffe/Darlington Area 1. Dale10ellis10 EP91 Glanza Hull/East Yorkshire 1. Laura_ep91 (ep91) 2. Blackrocket (Glanza) 3. SR Phill (EP91 SR) 4. Birdmandan (Glanza) (i can make some meets depending on distance) 5.ajep91 (glanza V) (same boat as birdmandan may make meets depending on distance) 6. BearFaceOfDoom (Glanza Veeee!) (Again the same as Birdmandan and ajep91. All depends on distance etc) Grimsby/Cleethorpes 1. lew777 (quad gt)

Its off the circle headlamp ones, and yes they do fit straight on, bar a longer vacuum hose. Oh and by the way you want to post it in the technical discussions bit dude, not in here!

Any half decent brand will do the job fine mate, but as above give the calipers a service, just undo the bolts through the sliders, remove them and grease up the seals, then do the same with the piston seal, back together, give em a bleed and that should have the brakes working perfectly dude. doesnt take long either tbh!

Looks brilliant, really going well! Would of thought you would have chopped the spare wheel well out mind!