Sefton-EP91

Can the original ECU be mapped, tweaked about with in anyway? I am under the impression it can be, only to a certain level, is this right? I'm not planning to mess around with it but just wanted to know just out of sheer interest? Thank you guys

Thought I would add a pic, I haven't added one yet. Feel free to leave comments and any suggestions.

Mine does it when cold. Are the pumps the same as the n/a pumps? It sounds like its coming from that area. I just hope I don't replace it and it ends up being the alternator pulley.. Are they very common on glanzas, the alternator pulley? Thank you.

I know this is an old thread but this noise seems to be coming from my PAS Pump I'm not convinced that its coming from the bottom pulley but I'm very grateful for your guys input. Has anyone experienced anything like this? It's getting very frustrating. Are the pumps on the n/a the same as glanza? Thank you guys.

I had someone start my car for me today to see if I could pinpoint where this noise is coming from and seems to be coming from the PAS pump, area. It sounds asif its coming from the pulley. Has anyone had this problem? Can anyone point me in the direction as to where I can get another PAS pump from? Are they the same as the n/a's?

im after a braided oil feed/return line. pm or reply here if anyone has one thank you

What do you guys make of japspeed, was thinking of a new mani from them? Any one brought one from them or experienced any problems with them? Thank you.

Thank you for the info guys it is much appreciated thought maybe the sticker was trying to tell me that I had a hidden gem lol (that I never knew about) lol again thank you guys

It's probably been covered already but what does it look like from the outside, I found a sticker on the inner door slam of my car and it says LSD on it it's all in Japanese so I can't understand it but before it says LSD it's got my engine number etc etc in seperate sections. Any ideas? It's on drivers side door slam..

Yeh this sounds like my problem ill check the ring gear on fly wheel with starter removed thank you mate

When you say starter sticking in do you mean it's not fully come out of the housing?

Old post but thought I would add, I have just recently started to get a noise (crunching/grinding) on start up, it only when I turn the key for engine start whilst engine is turning over, have a feeling it could be starter motor but you guys have any ideas or had something familiar? Thanks Thought I would add the starter has never failed to turn on the car..

I'll be there.. Count me in! Rob ro55ifumi Hair Tara james@cjperformance Steve GT Starbuck TrisK Akyakapotter + Tara Jakeep82 Sefton-EP91 + girlfriend

Thanks for the headlights matey received very fast as promised

how much would the decat and manifold be inc postage if i was to buy together?

I'll be up for this defo with the girlfriend, give me a chance to meet some of you guys

No problem mate

Sorry for mentioning this guys but I'm sure you want the site to be perfect but where it says: We dont provide anything psyical but for those who use the community alot, we remove alot of the restrictions and set parameters that standard members have. This is where you would purchase the membership in the store. The word physical, Under the question: What you get if you purchase? Hope this helps.

I'll check tomorrow and then I'll let you know what I find. Thank you for the info though. Might have to change this as well. If it goes then thumbs up if not then Ill have to keep looking gna check the bottom pulley as well like dangeestarlet said.

I'll check that out tomorrow, if your right.. Does this mean a new pulley?

I've seen it a few times in boongate McDonald's. it's an r reg ends in Xbt.

It's only when the car is cold, it definatly not the release bearing. it sound like its coming from the bottom near the alternator..? Where is the water pump on a 98 spec glanza? Isn't it near the alternator at bottom?

I have just started to get a screeching noise from cold, it's not a belt noise, it sounds like a bearing or something along those lines. Any ideas? Thanks

15 posted?

Im after the trim that goes on the inner side of the bootlid, it covers the rear number plate bulbs etc. please pm me or reply here. thanks.