Turbo Goose

Do you have a multimeter?

Right, ill get on it tonight. The wastegate hit the rad hose with the pipe it came with, also the welding on it was a joke. Ill see if i can mount the ewg straight to the manifold so its not as far away from the mani Old pipe

My ct9 gave off mental chatter was very loud

Also, where the water outlets come out from the engine ive just raken one pipe off and looped the other round is that ok? And when removing the water pipes off yhe engine i lost about 1 to 2 litres of water, with this automatically re bleed itself from the rad then just a case of topping it up?

Thanks very much

Thats ok then, mine faces the floor. Fits up against the screamer

Facing the screamer, is that wrong lol? Always seen ewg facing upright if you know what i mean.

Hi guys, i know eveyone says you can run a td04 without waterlines but do i simply stick a couple of m12x1.25 bolts in there and hey presto or do i wack a little oil in there to keep it lubed then put bolts on. Or does it simply run dry? Smoked a little from the water outlets earlier probably just burning a bit of excess crap outa there Thanks, dan

Sorted. Basically im being a tit. By not having the screamer on there, the washer/ring bit on the bottom wasnt pushed tight to the wastegate penny. My bad but thanks guys

Ill take it off and have a look

Just fitted a td04 kit and started for first time without screamer pipe on. I have a tial 38mm ewg and i could feel the gases coming out of it. Should it be a tight seal or is a little seepage expected? Thanks, dan

Item For Sale: Td04 chra (core) for sale. Item Condition & Description: Bought this off ebay thinking it would fit my TF035 but doesnt. Been rebuilt using genuine bits but i have no receipts. Its tight as a drum and you can see the new shiny bits inside. All blades are perfect and unmarked Price: I won it for over £50 delivered. Selling for £40 delivered to recover some funds Pictures: Payment & Shipping Details: Via courier. Paypal

Haha tim its a deal! And ollie im so tempted mate. Ive had 1 fucked turbo, one that im not sure on which is on the car atm and a chra which doesnt fit. Its going well

sold

sold

Anyone got a cheap Td04 thats knackered and want peanuts for? thanks, dan

I know it doesnt fit buddy thats my point lol. Ive got a td04 chra sat in my room and wondering if i fit the tf035 exhaust wheel it would be ok or would it be unbalanced. Im tempted to buy yours at this point. Already wasted over 120 quid

Hi guys, ive got a tf035 turbo. I bought a rebuilt td04 core/chra thinking it would fit. Turns out the exhaust side blade wheel is larger. Could i just swap the tf035 blade wheel for the td04 one and fit the rebuilt chra into the tf035 or would this cause it to be unbalanced? Or just risk it for a biscuit. Thanks guys Dan

http://www.ukstarletowners.com/topic/83298-any-one-want-chatter/#entry1021038

Ive got one for sale

Sold

sold

Is that the one that was for sale with the 98 spec bumper? The guy you bought it off has got a bad name on here. Pic was taken outside some gates i believe half parked on the path?

Up