Jump to content

Dan_Henderson

Member
  • Content Count

    212
  • Joined

  • Last visited

Everything posted by Dan_Henderson

  1. They sit fine mate , I've had lowered cars before and they aren't too different to proper springs
  2. Bump need parts ASAP and as very cheap as possible, thanks for any help lads
  3. I am mate but I need to buy a decent product to get the glue off
  4. is it the adjuster rings that are seized? mine did on my corsa, u just used an extention bar and hammer and knoked the rings around
  5. spot on mate cheers for the info u legend!
  6. Hi lads I fancey installing a drift style vertical handbrake , is it possible with drums? I'm aware mine is a cable at the minute, can I convert it without getting disks?
  7. Yea mate so the brake light is also a tail light but gets brighter
  8. Hi lads I've seen the how to thread on here somewhere but can't find it now, can't anybody post up a link of tell me how to do it? Thanks
  9. Just a quick bit of info that some might find usefull. Wire colours and what there for. Models may vary but this was on my ep91 starlet 1.3 n/a sportif. Power + Battery feed = Blue/Yellow + Ignition feed = Grey - Ground = Brown Front Speakers + Right = Light green - Right = Cyan + Left = Pink - Left = Purple Rear speakers + Right = Red - Right = White + Left = Black - Left = Yellow
  10. cheers to those that helped, the wiring diagram i had said black was - but its infact brown that is - and the dome fuse was blown in the fuse box in the bay I now have a working head unit woop woop!!
  11. cheers mate, its the perm live missing mate
  12. its worked fine in other cars I've had, its not the connection im having problems with , im not getting a live and yes the HU works I've had it hooked up directly to a battery
  13. Is there any fuses in the engine bay that would my radio/clock/int light not work?
  14. alright lads show is what you have on your keys? with me just getting the starlet i just have a boring single key!
  15. Any chance you could post. Pic please mate? And is it a front or back?
  16. Luckily you have an uncut bumper, a lot of them have been cut for the intercoolers
  17. Rear bumper Reg holder and spoiler or full boot lid Side skirts Front bumper Headlights Bonnet Any of these as cheap as possible, don't mind if they need work just need to be cheap
  18. I need a cheap glanza kit ones on eBay are quite expensive, how much did u pick the front end up for?
  19. I need some inspiration for my boring bay, anybody got any nice n/a bays? I'm thinking about painting inside my bonnet with the jap rising sun too
  20. Wish I did now mate but I've already cut into it, it must be a fuse because the clock and interior light isn't working either but the fuse under te steering wheel looks fine
×
×
  • Create New...