Craigtrials95 Posted August 23, 2016 Share Posted August 23, 2016 Any information on these cams I have I believe they are ivan tighe 282 cams with 8mm lift they have never been used. Planning running around 350bhp on a 5e so just wondering if these are worth the head work and any advantages etc?Cheers Craig Quote Link to post Share on other sites
5e colin Posted August 23, 2016 Share Posted August 23, 2016 worth it yes sey goodby to your idle she be running ruff Quote Link to post Share on other sites
akyakapotter Posted August 23, 2016 Share Posted August 23, 2016 worth it yes sey goodby to your idle she be running ruffBut that sound haha Quote Link to post Share on other sites
Craigtrials95 Posted August 23, 2016 Author Share Posted August 23, 2016 That's the main reason I wanted aggressive cams hahaha. Can't beat the noise of cams Quote Link to post Share on other sites
5e colin Posted August 23, 2016 Share Posted August 23, 2016 That's the main reason I wanted aggressive cams hahaha. Can't beat the noise of cams then you wont regret it ha ha i hope you are going past stock limiter to make full potential out of them ?? Quote Link to post Share on other sites
Craigtrials95 Posted August 23, 2016 Author Share Posted August 23, 2016 Not 100% on management yet. Currently got a dastek unichip in the car at 200bhp and I've read this ecu can cope with over 300 so might stick with it but not sure if it allows to extend the limiter? Quote Link to post Share on other sites
_shaun_ Posted August 23, 2016 Share Posted August 23, 2016 depending what bhp your aiming for Might be worth reconsidering your management system. Once your on the dyno you can get the data you need to decide where you should limit your rpm. Quote Link to post Share on other sites
Craigtrials95 Posted August 24, 2016 Author Share Posted August 24, 2016 Wanting 350bhp roughly. Had a read that tmd built a few 300bhp starlets running the dastek unichip. It's either keep that or save for standalone. I was looking at the dta ecus Quote Link to post Share on other sites
richardc9052 Posted August 24, 2016 Share Posted August 24, 2016 Ecumaster emu for that power with big cams. You can adjust injection angle which would help if you end up with large overlap Quote Link to post Share on other sites
daniel_g Posted August 24, 2016 Share Posted August 24, 2016 Sure Shaun uses the DTA Quote Link to post Share on other sites
Craigtrials95 Posted August 24, 2016 Author Share Posted August 24, 2016 How does the ecumasters emu wire into the starlet I'm guessing it won't be plug and play? Quote Link to post Share on other sites
richardc9052 Posted August 25, 2016 Share Posted August 25, 2016 You can get an adapter harness made up! Check out Turbo Fevers thread. He is using one. He has the android app on a tablet in center console too which is pretty awesome. http://www.ukstarletowners.com/topic/95161-td05-billet-5efte-ep82-caged-ecumaster/ Quote Link to post Share on other sites
Craigtrials95 Posted August 25, 2016 Author Share Posted August 25, 2016 Spot on mate I've had a look on his thread and gave him a message cheers Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.