Excessive breather oil

[T-dog]

Today I took the car for a drive , only to find when I opened up my engine bay it was covered in oil . It looked like it was coming from the rocker cover breather , so I cleaned the bay up of oil and tried a new pcv valve and rocker cover and clean all pipes to see if It had a blockage ect . Then took it out again to see if any better , but as soon as it hit boost it like a bloody fountain coming out the breather . Any one else ever had this problem , I've put it down to ring lands / blow by , but would like to see what other think it is cheers in advance 👍🏼Toby

[T-dog]

It's also a low mileage 4efte fresh import , running 0.8 bar of boost , with minimal mods

[patman]

How minimal mate just to bump this up

[T-dog]

Blitz p&p ecu , wepr mani and decat with hks actuator 0.8 bar , with a relocation air filter . Apart from that everything is standard

[Flynn]

Decat, Hks actuator and mani. With the car sitting after a 2 min journey on boost, Toby gave the car a Rev and the oil comes surging up through the filter as the pressure builds.

Snap forgot the ecu

[T-dog]

^^^ cheers joe 😘

[MR-2]

Knock knock, pistons are dead from intake valve side, few times have driven with oily windscreen, when I was young kid :/

[Flynn]

Wah 😭

[T-dog]

Will have to forge it over the winter joe lol ^^

[Flynn]

That's the spirit mate!

[T-dog]

Bump , Any one ever had this before or know more info about this issue

[fiddlersport]

http://www.ukstarletowners.com/topic/38276-does-my-engine-have-blowbyhow-can-i-tell-here-is-the-answer/#entry1184031

[5e colin]

ringland

OR its just an old engine flokked of aS A FRESH YOKE HA HA

[starletezy]

Piston rings

[T-dog]

Cheers guys , yeah I did think as much 😢 Lol , winter build it is

Edited August 31, 2016 by T-dog

[starletezy]

Good excuse to go forge lol

[T-dog]

Indeed mate 👍🏼 ^^^

[mark1991]

I had this too

As above its the rings

Good luck lad