Fozzie Posted April 18, 2017 Posted April 18, 2017 Great update, I really enjoyed reading all the nitty gritty on how you got everything built back up. Look forward to seeing more on this! Quote
Ollieh17 Posted April 18, 2017 Posted April 18, 2017 (edited) ID workz do a 19 to 16mm 90degree hose Edited April 18, 2017 by Ollieh17 Quote
Socks Posted April 18, 2017 Posted April 18, 2017 Me and some mates are at Blyton on the 14th May if your ready in time Tim! Quote
maerijn Posted April 19, 2017 Posted April 19, 2017 (edited) Is your coolant overflow bottle a stock GT bottle?Also is your catch can vented somewhere? Edited April 19, 2017 by maerijn Quote
TimD Posted April 19, 2017 Author Posted April 19, 2017 Me and some mates are at Blyton on the 14th May if your ready in time Tim! That'll likely be a little too early for me, I've a couple of weeks off the car now. Is your coolant overflow bottle a stock GT bottle? Also is your catch can vented somewhere? It is, I separated it from the washer bottle and relocated it to the opposite side of the engine bay. The catch can is vented underneath Quote
epcashin Posted April 21, 2017 Posted April 21, 2017 love this build so far where did you get the clamps for holding unit ? want to do this to mine Quote
TimD Posted April 21, 2017 Author Posted April 21, 2017 Thanks. A friend of mine had some laying around, but if you search for accusump brackets you should be able to find them quite easily. Quote
epcashin Posted April 21, 2017 Posted April 21, 2017 Thanks. A friend of mine had some laying around, but if you search for accusump brackets you should be able to find them quite easily. wat size roughly ? 4 and 1/4 inch ? Quote
TimD Posted February 11, 2018 Author Posted February 11, 2018 (edited) Still working on this thing, in the middle of a complete re-wire. http://www.youtube.com/watch?v=A_LJlBzmQLI Edited February 11, 2018 by TimD Quote
Calum122 Posted February 11, 2018 Posted February 11, 2018 Absolutely superb job on this. Looking like a lovely motor. Keep it up! Quote
TimD Posted March 18, 2018 Author Posted March 18, 2018 No more updates on the car, but the display I've been working tirelessly on is finally at a point where it bolts in. Should hopefully get the chassis wiring finished very soon, then move onto the engine/ecu harness before having it mapped. Quote
Bean Posted March 22, 2018 Posted March 22, 2018 great thread. Are you running this car on the stock dizzy but with a DTA ECU? Quote
TimD Posted March 22, 2018 Author Posted March 22, 2018 Thanks. It'll be COP, the S80 can do sequential injection and ignition. I 3D printed a bracket for my wideband gauge/controller the other day. Whilst my dash will display a wideband value from CAN, I didn't want to hide the controller away out of sight. I'll be back working on the car this weekend, can't wait! Quote
antheon2010 Posted January 4, 2019 Posted January 4, 2019 Hello  Great process and attention to detail you have here  I need some help as im after an ep82 engine loom if you could possible help . Thankyou Quote
TimD Posted April 15, 2019 Author Posted April 15, 2019 Loads happening, but still not used it in anger for far too long. Few bits and pieces left to do before mapping and a shake down. Â Â Quote
Socks Posted April 21, 2019 Posted April 21, 2019 Looking great Tim! Look forward to seeing it back on track! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.