templar2007 Posted January 17, 2012 Share Posted January 17, 2012 Lookin nice tho mate engine doin well to with that many miles Quote Link to post Share on other sites
Galen Posted February 27, 2012 Author Share Posted February 27, 2012 Actually had a decent bit of weather here at the weekend so a polish was in order.Got my fogs tinted last week too, think it makes the car look more aggressive and dark! Quote Link to post Share on other sites
Galen Posted May 2, 2012 Author Share Posted May 2, 2012 Finally got around to fitting the Whiteline rear ARB thats been in the shed the last 2years!!And it was also in need of some new tyres so got onto Camskill and got 2 TOYO Proxes T1R delivered for €104. Ordered them sunday and they arrived Tuesday evening, very happy with that, be getting my tyres from there anymore.Also had a Cusco underbrace in the shed that I took off the car before as it used to hit the exhaust but got it sorted.So this morning this is what was waiting to be fittedSo out to one of the lads and we got stuck inOne side bolted upVery happy with the ARB, didnt drive the car a whole lot yet but you can really notice the difference it makes. Car seems to turn in a lot quicker and easier and the back end just feels stiffer and more stable. Really changes the handling of the car, a very worthwhile mod! Quote Link to post Share on other sites
Liam_D Posted May 3, 2012 Share Posted May 3, 2012 Whiteline ARB is a awesome mod dude! Quote Link to post Share on other sites
Galen Posted May 31, 2012 Author Share Posted May 31, 2012 Whiteline ARB is a awesome mod dude!It is, very happy with it!Postman dropped this off this morningOEM Centre ArmrestBeen after one for ages now!All fitted Quote Link to post Share on other sites
Galen Posted March 22, 2013 Author Share Posted March 22, 2013 Went TD04! Only boosting .7bar so far on JAM ecu. Thinking of going for an emu instead of the JAM though and getting car mapped for 1bar on that Quote Link to post Share on other sites
Galen Posted March 25, 2013 Author Share Posted March 25, 2013 Picked this up today off Browner!New GReddy Emanage UltimateUniversal harnessMap sensorInjector harnessAll new and unused!Just to get it fitted and mapped now! Quote Link to post Share on other sites
Galen Posted March 30, 2013 Author Share Posted March 30, 2013 Was time for a good cleaning, hadn't got around to polishing the car in a month or twoUsed Autoglym Super resin polish and then treated it to a bit of HD wax Quote Link to post Share on other sites
Liam_D Posted March 30, 2013 Share Posted March 30, 2013 Does look very good mate! Quote Link to post Share on other sites
Galen Posted April 3, 2013 Author Share Posted April 3, 2013 Does look very good mate!Thanks! Here's a pic that was taken in Mondello on Saturday at an AE86 Trackday.Being a bit big headed but cant believe how good it looks in this pic, I'm in love! lol Quote Link to post Share on other sites
maddox710 Posted April 3, 2013 Share Posted April 3, 2013 Oh gosh that looks awesome!!! Quote Link to post Share on other sites
Spoon_tuned Posted April 3, 2013 Share Posted April 3, 2013 Gangsta lean lol Quote Link to post Share on other sites
pick1 Posted April 4, 2013 Share Posted April 4, 2013 Looks a beaut n love the rims Quote Link to post Share on other sites
Galen Posted April 15, 2013 Author Share Posted April 15, 2013 Car was mapped yesterday!Up with Chris Carson in Crossgar, was a fair oul spin up and down but well worth it. Ecu wired in and then out for a bit of road mapping, great craic ha! I need new break pads after it though, they were already bad but he just finished them off today!Got her mapped for 1 bar though, goes well apart from a slight miss, needs new plugs, should of changed them before hand really.Oh and road mapping is thirsty work, could nearly see the needle dropping!! Quote Link to post Share on other sites
Galen Posted April 28, 2013 Author Share Posted April 28, 2013 (edited) Picked up a few more bits this week, it never ends with these cars ha!Got some levin twinpot calipers, just have to get discs and longer wheel studs and I'll get them fitted, will finally have good brakes then haSpotted this on donedeal last night and had to have it, for the money it was going for I couldnt leave it there.It's a genuine Varis carbon fibre bonnet with water tray. Love the aggresive look they give to the front of a Glanza. Unfortunately it has been painted black and the paint is fairly flat and dead looking so will need a respray before fitting. Would love to bring it back to the carbon if its possible.had horrible bonnet pins too so I'll invest in some aerocatch ones to tidy the look up. Edited April 28, 2013 by Galen Quote Link to post Share on other sites
DaddyDutch Posted April 28, 2013 Share Posted April 28, 2013 Looking good mate. Love this car. Seen the bonnet on Dungdeal. Should look good when fitted. PM'd. Al. Quote Link to post Share on other sites
Ct9 Posted April 28, 2013 Share Posted April 28, 2013 Suddenly spending out mate. Looks sweet as always. Might see you next week. Quote Link to post Share on other sites
Galen Posted April 28, 2013 Author Share Posted April 28, 2013 Looking good mate. Love this car. Seen the bonnet on Dungdeal. Should look good when fitted. PM'd. Al. Thanks Al! Suddenly spending out mate. Looks sweet as always. Might see you next week.Spending too much Max, have to stop now haSee ya got a new addition to yours too! Looks well Quote Link to post Share on other sites
Ct9 Posted April 28, 2013 Share Posted April 28, 2013 Cheers have to drop the front of mine abut now and fit a front mount. Quote Link to post Share on other sites
Galen Posted May 2, 2013 Author Share Posted May 2, 2013 (edited) Just a better pic of the bonnet, cannot wait to get it on!!Ya can see the scratches on the front and there's some light cracks in the paint around the middle vent so it will need a respray before fitting. The black doesnt match my car either so has to be done anywayThe important bit! Edited May 2, 2013 by Galen Quote Link to post Share on other sites
46james46 Posted May 13, 2013 Share Posted May 13, 2013 loving the cage mate! might have to do something similar Quote Link to post Share on other sites
Galen Posted May 24, 2013 Author Share Posted May 24, 2013 Got rid of the Varis bonnet...........and replaced it with thisIt's midnight purple now so needs a respray before fitting. Quote Link to post Share on other sites
Galen Posted May 31, 2013 Author Share Posted May 31, 2013 Test fit of the bonnet.Just have it on for fitting the aerocatch bonnet pins.Gonna have to get some heatwrap too! Quote Link to post Share on other sites
Ct9 Posted June 27, 2013 Share Posted June 27, 2013 Did you get this sprayed and fitted yet mate? Quote Link to post Share on other sites
Galen Posted July 9, 2013 Author Share Posted July 9, 2013 Did you get this sprayed and fitted yet mate?Nope, still sitting out in the shed! haI will eventually though!Still boosting away! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.