mark1991 Posted April 19, 2012 Share Posted April 19, 2012 i had the gt on the rollers today at wallace performance, had always thot it was around 145bhp... to be told is 172bhp at the fly was a shock i will get a vid up and a pic of the print out what do you guys think?the mods arefront mount filterfront mount intercoolergizzmo ebctd04 actuatorjperformance decatjapspeed cat backported cast manofoldthats about it Quote Link to post Share on other sites
morgey Posted April 19, 2012 Share Posted April 19, 2012 that seems like a very generous dyno to be making that power on stock boost imo, like you said 145-50 was to be expected lol, it may not be but just seems that way. if its correct then congrats very good figures Quote Link to post Share on other sites
Socks Posted April 19, 2012 Share Posted April 19, 2012 s314kba.co.uk/leaderboardget it submitted! compare with others! Quote Link to post Share on other sites
mark1991 Posted April 19, 2012 Author Share Posted April 19, 2012 it was a rolling road day so alot of the other cars got there expected results and some did not lolcheers mate Quote Link to post Share on other sites
mark1991 Posted April 19, 2012 Author Share Posted April 19, 2012 alreet doing it now mate ;) Quote Link to post Share on other sites
mark1991 Posted April 19, 2012 Author Share Posted April 19, 2012 wont let me Quote Link to post Share on other sites
starletburkie Posted April 20, 2012 Share Posted April 20, 2012 at stock boost? lol Quote Link to post Share on other sites
Johnboy GT Posted April 20, 2012 Share Posted April 20, 2012 Thats very surprising?!John Quote Link to post Share on other sites
mark1991 Posted April 20, 2012 Author Share Posted April 20, 2012 set at .65 but creeped to 0.72bar. Quote Link to post Share on other sites
Flaminsam Posted April 20, 2012 Share Posted April 20, 2012 Is your turbo wastegate ported too? I'm just wondering how with all them mods you have managed to keep the boost that low. On charls advance, the boost would hold at around 0.5 then spike to almost 1.2 by 4500rpm. Quote Link to post Share on other sites
Socks Posted April 20, 2012 Share Posted April 20, 2012 wont let me All Fixed Now Matey! Re-Submit!Sorry about that! Quote Link to post Share on other sites
Amjad Posted April 20, 2012 Share Posted April 20, 2012 Sounds gig but if that's a decent dyno then well done!My GT held 0.8bar perfectly before I plugged in Mine's management (ported mani and wastegate) Quote Link to post Share on other sites
micky boy Posted April 21, 2012 Share Posted April 21, 2012 (edited) Wonder why them Dastec dyno always crosses over at a different point on the graph to most dyno's? i've got an old print out here that i've never put up of my very first glanza and that seams to cross over at the same point as yours above... I was useing apexi power fc ecu also i had a bent actuator braket as it says on the sheet so it could of held boost alot better if that was changed at the time Edited April 21, 2012 by micky boy Quote Link to post Share on other sites
WallaceGlanza Posted April 21, 2012 Share Posted April 21, 2012 Wonder why them Dastec dyno always crosses over at a different point on the graph to most dyno's? i've got an old print out here that i've never put up of my very first glanza and that seams to cross over at the same point as yours above... I was useing apexi power fc ecu also i had a bent actuator braket as it says on the sheet so it could of held boost alot better if that was changed at the timeIts just because of the scaling being different for power and torque on the graphs.It's not quite standard boost but it is still a very good figure, slightly surprising but then again so is 200bhp at 1bar on a ct9, will be interesting to see what you make if you up the boost. Quote Link to post Share on other sites
Ricky@Race-Tech Posted April 24, 2012 Share Posted April 24, 2012 Dasteks tend to read a little high, but dyno's are tuning tools, so long as you use the same one to compare your ok.RegardsRicky Quote Link to post Share on other sites
Socks Posted April 24, 2012 Share Posted April 24, 2012 s314kba.co.uk/leaderboardget these submitted onto here chaps! Quote Link to post Share on other sites
Adam_Ep91 Posted April 25, 2012 Share Posted April 25, 2012 nice results man Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.