Stefan_s Posted July 16, 2012 Share Posted July 16, 2012 hi, i just bought a td04 kit for my glanza, im currently running a hybrid ct9 with an aem fic which has been mapped to 1 bar, what would be a safe boost pressure to run on the td04 untilli can get it remapped for the td04?thanks Stefan Quote Link to post Share on other sites
lew777 Posted July 16, 2012 Share Posted July 16, 2012 would say 0.6 bar mate Quote Link to post Share on other sites
shorty Posted July 16, 2012 Share Posted July 16, 2012 As above .5/.6 will be fine. drove mine at that for ages when i had td04 on my v. Quote Link to post Share on other sites
Stefan_s Posted July 18, 2012 Author Share Posted July 18, 2012 also will i need to upgrade my injectors or will standard ones be fine? Quote Link to post Share on other sites
_shaun_ Posted July 18, 2012 Share Posted July 18, 2012 standard will be fine i ran 1.3bar on a td04 with stock injectors Quote Link to post Share on other sites
Stefan_s Posted July 18, 2012 Author Share Posted July 18, 2012 cool thanks what sort of power would i be likley to get at about 1.2 bar? Quote Link to post Share on other sites
pick1 Posted July 18, 2012 Share Posted July 18, 2012 all depends on your mapp and mapper i would presume roughly around 240 bhp maybe more mate i made like 225 at 1 bar but everyones car is different Quote Link to post Share on other sites
Stefan_s Posted July 18, 2012 Author Share Posted July 18, 2012 cool thanks Quote Link to post Share on other sites
Hawwy Posted July 18, 2012 Share Posted July 18, 2012 How much is safe on stock Quote Link to post Share on other sites
pick1 Posted July 18, 2012 Share Posted July 18, 2012 People will recommend 1bar on stock internals but I have seen people go to 1.2 and I'm sure driver on here was running 1.4 all depends how much u want to push your engine I went for a bar as that's what I was advised by tuning developments and they mapped the car for me so i tend to stick with that they tell me Quote Link to post Share on other sites
little dave Posted July 18, 2012 Share Posted July 18, 2012 i run 1.2 on mine went to nurberg and back racing everything and abused her and drive home with out a single problem Quote Link to post Share on other sites
maddox710 Posted July 18, 2012 Share Posted July 18, 2012 i wanted too see around 190bhp-200bhp from a 1bar on hks fcon,on stardard internals. but from looking around the figures sway around immensely :s Quote Link to post Share on other sites
pick1 Posted July 18, 2012 Share Posted July 18, 2012 i wanted too see around 190bhp-200bhp from a 1bar on hks fcon,on stardard internals. but from looking around the figures sway around immensely :sU on tdo4 or ct9 mate ? Quote Link to post Share on other sites
_shaun_ Posted July 18, 2012 Share Posted July 18, 2012 i ran 1.3bar for just over a year n kicked the crap out of it almost everyday and engines still going strong Quote Link to post Share on other sites
Driver Posted July 18, 2012 Share Posted July 18, 2012 (edited) People will recommend 1bar on stock internals but I have seen people go to 1.2 and I'm sure driver on here was running 1.4 all depends how much u want to push your engineI went for a bar as that's what I was advised by tuning developments and they mapped the car for me so i tend to stick with that they tell me1.6 peak on a few santa pod "suicide runs" but 1.4 daily (for about 18-24moth) correct I wouldn't run it at all without a map on a td04. Just wait until you can afford/find time etc to get it mapped then do the swap over then if you cant get it trailered/towed over drive it off boost. Better safe then sorry and all that. Edited July 18, 2012 by Driver Quote Link to post Share on other sites
Ryan-11 Posted July 18, 2012 Share Posted July 18, 2012 Stefan get some 440cc injectors and get it up to 1.4bar Quote Link to post Share on other sites
pick1 Posted July 19, 2012 Share Posted July 19, 2012 1.6 suicide runs legend !! Lol bet it was a tastey motor at the pressure But yeah I agree get someManagement so u can have it set up properly I dint have mega pennies so I went emanage blue fitted and mapped by tuning developments for my ct9 set and they mapped it for my td04 set up cant recommend the guys enough Quote Link to post Share on other sites
maddox710 Posted July 19, 2012 Share Posted July 19, 2012 U on tdo4 or ct9 mate ?. Sorry bud ct9 atm but wait on last parts for td04 build Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.