Dan_Henderson Posted December 8, 2012 Posted December 8, 2012 I need some inspiration for my boring bay, anybody got any nice n/a bays?I'm thinking about painting inside my bonnet with the jap rising sun too Quote
morgey Posted December 8, 2012 Posted December 8, 2012 throttlebodies and heat wrap ;) naa only joking i just like whoring my engine bay even if it is quite plain Quote
Socks Posted December 8, 2012 Posted December 8, 2012 One of Motions Bay... Dont get much more perfect then that! Quote
motion Posted December 8, 2012 Posted December 8, 2012 cheers socks this is how it looked like a month agomeanwhile i removed the blue from the washers/battery bracket and polished them Quote
rob_bower Posted December 9, 2012 Posted December 9, 2012 Mine although it was a bit grubby in this pic. Quote
Liam_D Posted December 9, 2012 Posted December 9, 2012 Look in my old build thread for mine buddy, as i appear to have lost the pics. Heres a link http://www.ukstarletowners.com/index.php?showtopic=6524Still have the rocker cover too if you fancy it?? Quote
the quiet achiever Posted January 20, 2013 Posted January 20, 2013 hi an old photo but something different Quote
rob_bower Posted January 20, 2013 Posted January 20, 2013 Neither are obx mine was a one off and motions is made by a German company. Quote
James21 Posted August 17, 2013 Posted August 17, 2013 Are there any more... I need some inspiration aswell! I was gunna start a new thread but thought i might aswell keep this going... Even though mines completely standard, just cleaned (slightly lol) here it is... Got mushroom filter and strutbrace to fit once its sprayed... But NEED IDEAS!!!! All the photos out there are turbos lol Quote
ryan lang Posted August 17, 2013 Posted August 17, 2013 Never really took a lot of pictures, but here's some. It was never clean so no point saying its dirty in this pic hahaAnd after a rocker respray Quote
jimmymac101 Posted October 10, 2013 Posted October 10, 2013 Rw developments will make you mate drop dean a message James Quote
Chris Green Posted October 10, 2013 Posted October 10, 2013 Or jegs.com for an OBX or Pacesetter. Be prepared to pay £300-400 for one though. Quote
Mernagh Posted October 10, 2013 Posted October 10, 2013 thats an awful price for an N/A manifold is there any other ones that can fit it from other toyota engines that will make a good power gain ? Quote
Chris Green Posted October 10, 2013 Posted October 10, 2013 (edited) 4e-fe corolla has a 4-2-1 manifold, should be able to pick on up from the scrappers for £50 or so. Its the bug eye corolla your looking for. 5e-fhe has a 4-2-1 also, different shape to the corolla one, but a lot rarer. Edited October 10, 2013 by chrisgreen1993 Quote
jimmymac101 Posted October 10, 2013 Posted October 10, 2013 If I remember right from when I asked dean to make me one, it was around £200-300 but that's a custom made one which is direct fitJames Quote
Chris Green Posted October 10, 2013 Posted October 10, 2013 May as well throw up a pic of my bay - still needs a lot of tidying. Quote
jimmymac101 Posted October 10, 2013 Posted October 10, 2013 Chris that's looking sexy as fuck man you think there will be a decent power gain with the itb's ? James Quote
Chris Green Posted October 10, 2013 Posted October 10, 2013 There is already mate, had them on for about 700 miles now. Don't know what to power figure is. Major improvement on low down torque as well. Cheers! Still need to start wire tucking and really tidying up the bay. Here's a quick video of 0-100mph. >http://www.youtube.com/watch?v=HkrjoF0bU_w&feature=youtu.be Quote
Mernagh Posted October 10, 2013 Posted October 10, 2013 That's a savage looking bay ! What make mani is that ? The ITB's look and sound deadly on it are they custom ITB's ? Quote
ryan lang Posted October 10, 2013 Posted October 10, 2013 its an obx manifold mate. same as the one on my old one above Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.