james@cjperformance Posted January 6, 2013 Share Posted January 6, 2013 Right guys and girlsThought I would just follow on from the other topic to see what would be the best idea for this situation.It is something we have been looking in to for the past 12 monthsThere are a few options availableFull uprated drive shafts complete with machined hubs and larger bearingsstandard size complete uprated driveshaftsUprated replacement CV JointsObviously the most expensive of these options is the full set with bigger cv,s bearing and machined hubs, been as most of our products are made in the states the shipping cost for the first and second option would be quite high due to the size and weight.were as uprated cv joints could be used on most applications and even as just a replacement part with price in mindwhat are peoples thoughts on the above, as of yet we cant decide which would be the better option for both performance and your pockets :)oh and the price difference beetween all 3 would be pretty drastic Link to post Share on other sites
Ryan-11 Posted January 6, 2013 Share Posted January 6, 2013 Uprated replacement CV Joints, dont think ive ever seen a starlet snapping a drive shaft? Link to post Share on other sites
james@cjperformance Posted January 6, 2013 Author Share Posted January 6, 2013 ive not seen one go before either Link to post Share on other sites
little dave Posted January 6, 2013 Share Posted January 6, 2013 Cvs could be a good starting point I guess it's all down to a estimated cost on each optionMite make life alot easier Link to post Share on other sites
james@cjperformance Posted January 6, 2013 Author Share Posted January 6, 2013 1st option for a full set including verything to fit would be around £900 full uprated shafts would be around£450 and uprated joints would be around £175 Link to post Share on other sites
Glanza Mac Posted January 6, 2013 Share Posted January 6, 2013 Sounds like pretty fair prices tbh, I'd be in for the cv joints Rob. Link to post Share on other sites
little dave Posted January 6, 2013 Share Posted January 6, 2013 Cvs defo mate for that sort of price no one would say no Link to post Share on other sites
shorty Posted January 6, 2013 Share Posted January 6, 2013 I have to agree, i think if you go the whole hog its over engineering a solution to a small problem. i think start with cv' james and see if/what becomes the next week leank then deal with that if/when its been discovered. Link to post Share on other sites
steve-gers Posted January 6, 2013 Share Posted January 6, 2013 £175 a joint or £175 for all 4? Link to post Share on other sites
james@cjperformance Posted January 6, 2013 Author Share Posted January 6, 2013 ^^^^ would be all 4 for that price dude, inc fresh boots grease and clips And shorty I think your right, the whole hog is a bit overkill, we will see Link to post Share on other sites
daniel_g Posted January 6, 2013 Share Posted January 6, 2013 Sounds well good, could you supply/include the rubber balancer too ? Link to post Share on other sites
james@cjperformance Posted January 6, 2013 Author Share Posted January 6, 2013 ^^^ more than likely, may even look into having them made from polyurethane Link to post Share on other sites
daniel_g Posted January 6, 2013 Share Posted January 6, 2013 Right, where to i sign lol. *do Link to post Share on other sites
mattyD Posted January 6, 2013 Share Posted January 6, 2013 ^^^ more than likely, may even look into having them made from polyurethane Would be a definite plus from me if this where the case mate, may aswell go all out if your going to do it? Link to post Share on other sites
Mikep82 Posted January 6, 2013 Share Posted January 6, 2013 4 joints 175 count me in! Link to post Share on other sites
turbo Grant Posted January 6, 2013 Share Posted January 6, 2013 The joints will be a good starting point. The price is good so more people will buy them. The all out kit only a few will buy I suspect. Link to post Share on other sites
Got.boost Posted February 9, 2013 Share Posted February 9, 2013 I would be in for done uprated cv's as I have never seen and starlet snap a shaft :-) Link to post Share on other sites
Rob Graham Posted February 24, 2013 Share Posted February 24, 2013 Deffo would be interested in these , when will you have them?? Link to post Share on other sites
turboloon Posted February 24, 2013 Share Posted February 24, 2013 in what way are these going to be uprated ...stronger cages for the bearings...?,i would be deffo intrested as well as i'm replacing cv joints every couple years... Link to post Share on other sites
Sefton-EP91 Posted March 4, 2013 Share Posted March 4, 2013 I'd be interested depending on time. Have these started production or awaiting production? I need ASAP Link to post Share on other sites
Got.boost Posted March 14, 2013 Share Posted March 14, 2013 Anymore news on these as I'm going to need a set soon lol Link to post Share on other sites
scoobykilla Posted March 16, 2013 Share Posted March 16, 2013 Also interested in this Link to post Share on other sites
JordanEP91 Posted March 17, 2013 Share Posted March 17, 2013 What colour would they be? Link to post Share on other sites
Jamie1st Posted March 17, 2013 Share Posted March 17, 2013 (edited) Id be interested in the CV joint, if they ARE actually testsed. Santa pod snaps CV joints easily!! Edited March 17, 2013 by Jamie1st Link to post Share on other sites
Weyro Posted March 18, 2013 Share Posted March 18, 2013 definitely be up for the joints, great price too! Link to post Share on other sites
Recommended Posts