smb2011 Posted January 2, 2014 Posted January 2, 2014 Just wondering what boost and power everyone is getting out of the td04 Quote
akyakapotter Posted January 2, 2014 Posted January 2, 2014 (edited) I'm mapped to 1bar emb 233bhp but use 1.2 at drag days Edited January 2, 2014 by akyakapotter Quote
fardo999 Posted January 2, 2014 Posted January 2, 2014 I ran 235bhp (196wheels) an 220ft at 1.2 bar an was told to expect around 270 at 1.4bar Quote
smb2011 Posted January 2, 2014 Author Posted January 2, 2014 Both stock ? Or forged im on td04l emb mapped at 1bar dynod at 245bhp but I want to go 1.2 for drag days but im on stock internals risky? Quote
Chris_GlanzaV98 Posted January 2, 2014 Posted January 2, 2014 (edited) Forged 1.4 on high setting - Running 280hp very soon to be more normally drive at a bar, cars never out much though Edited January 2, 2014 by Chris_GlanzaV98 Quote
Liam_D Posted January 2, 2014 Posted January 2, 2014 Mines stock internals, WEPR TD04 kit @ 1bar 241bhpBoosted daily too Quote
Banbury Glanza Posted January 2, 2014 Posted January 2, 2014 (edited) Mines forged, 260.6bhp @ 1.4 bar and I drive it daily at that Edited January 2, 2014 by Banbury Glanza Quote
aaddzz123 Posted January 2, 2014 Posted January 2, 2014 Mine is stock 242bhp @ 1.2 bar. I drive it daily or at least 3-4 times a week and kick its head in every time lol. I'll be mapping to 1.4 bar later in the year still on stock internals Quote
akyakapotter Posted January 2, 2014 Posted January 2, 2014 Mine is stock 242bhp @ 1.2 bar. I drive it daily or at least 3-4 times a week and kick its head in every time lol. I'll be mapping to 1.4 bar later in the year still on stock internals I like this alot Quote
Chris_GlanzaV98 Posted January 2, 2014 Posted January 2, 2014 Mine is stock 242bhp @ 1.2 bar. I drive it daily or at least 3-4 times a week and kick its head in every time lol. I'll be mapping to 1.4 bar later in the year still on stock internals good luck with that mate, its all in the tune i say, although risky, if the tuner knows what they are doing it should last a good while Quote
_shaun_ Posted January 2, 2014 Posted January 2, 2014 I had mine mapped to 1.3 bar on a emu stock internals race-tech td04 kit ran it like that for about a year with no issues I had mine mapped to 1.3 bar on a emu stock internals race-tech td04 kit ran it like that for about a year with no issues Quote
Chris_GlanzaV98 Posted January 3, 2014 Posted January 3, 2014 forged 1.0 bar 265hp Phil Thats impressive, headwork ? Quote
Phil Posted January 3, 2014 Posted January 3, 2014 Thats impressive, headwork ? Oui, billet cam, no port no polish, stock inlet mani. High compression ratio ;) Oui, a bit higher than stock via multi head skim and block deck. Phil Quote
Dan Barnes Posted January 3, 2014 Posted January 3, 2014 Stock engine running emb @ 1bar = 237.6bhp Used daily Quote
EP-Azz Posted January 3, 2014 Posted January 3, 2014 Stock engine on emb , billet wheel hybrid td04 @ 0.9 bar 222.7 bhp Quote
AlancEP82 Posted January 3, 2014 Posted January 3, 2014 will be at a bar soon just need a decent clutch,some nice figures hope mine comes anywhere near any off the above Quote
akaye4000 Posted January 3, 2014 Posted January 3, 2014 (edited) Forged 1.4bar 304hp on a 5e;) omex standalone Edited January 3, 2014 by akaye4000 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.