Azz Posted March 10, 2014 Share Posted March 10, 2014 I bet there is mate. It's looking a lot better with some nice rims Cheers mate...Yeh man you just need some lows now ! Quote Link to post Share on other sites
jamesgray Posted March 10, 2014 Author Share Posted March 10, 2014 Yeh man you just need some lows now ! That is definitely in the pipeline, but with meister r's being so pricey they might have to wait a few months... Quote Link to post Share on other sites
jimlols Posted March 10, 2014 Share Posted March 10, 2014 This is gonna look awesome with a few more things! (like lows ) Quote Link to post Share on other sites
drongo boi Posted March 10, 2014 Share Posted March 10, 2014 Looks good with then wheels dude :-) Quote Link to post Share on other sites
Azz Posted March 10, 2014 Share Posted March 10, 2014 That is definitely in the pipeline, but with meister r's being so pricey they might have to wait a few months...Don't forget the ukso discount Quote Link to post Share on other sites
jamesgray Posted May 10, 2014 Author Share Posted May 10, 2014 Small Update but its progress. The car has had a good service. I bought iridium plugs and I changed the oil twice. Also bought a magnetic sump plug to catch any nasties. The car was jerking when cruising but fine when you boot it so I thought a good service might solve it but it's still doing it, and its getting slowly worse. I'm gonna get a new dizzy cap and rotor arm and see how she runs after that, fingers crossed. Parts BoughtCheap Oil Castrol Magnatec 10w40Oil Filter Magnetic Sump PlugFuel FilterIridium Spark PlugsCambelt KitPAS Belt & Alternator Belt Pic of the goodies Quote Link to post Share on other sites
jamesgray Posted March 29, 2015 Author Share Posted March 29, 2015 (edited) Hi All, Its been a while since my last post and there's not allot to report... The car has had another service and the rear drums have been painted blue...I will post some before and after pics once the car has been cleaned this week...Its also had a new dissy cap and rotor arm fitted...Although not much has been done there is some sight of progress coming next week... I have bought an exhaust cutter so I can fit the stainless cat back system from my old starlet, and I am also trying to source an Apexi air filter with a 40 degree polished pipe from Dean at RW-Developments... Once they are both on I will upload some pics and possibly a little vid of it running... Edited March 29, 2015 by jamesgray Quote Link to post Share on other sites
Rich-k Posted March 29, 2015 Share Posted March 29, 2015 Shaun hibbs?! You must be local to me then mate i want to get my exhaust made there! Where abouts are you? I live in dwygyfylchi about 5 mins from conwy! Progress looks good matey! Quote Link to post Share on other sites
jamesgray Posted March 29, 2015 Author Share Posted March 29, 2015 Cheers mate, I live in Llanfair Pg so yea not far...My exhaust is built by Sean Hibbs yea...He is awesome at what he does Gonna get a little de-cat section made up as soon as I got some spare cash... Quote Link to post Share on other sites
jamesgray Posted April 2, 2015 Author Share Posted April 2, 2015 Clutch has just gone... Ordered an Exedy clutch kit from ID-Workz... Hopefully getting it fitted along with my cat back stainless, Apexi induction kit from RW-Developments and my wind deflectors from Rich-k next week... Can't wait... Quote Link to post Share on other sites
Rich-k Posted April 2, 2015 Share Posted April 2, 2015 Be great with all the bits done the deflectors will make a nice difference too! Quote Link to post Share on other sites
jamesgray Posted April 3, 2015 Author Share Posted April 3, 2015 I know mate... I can't wait to get all the jobs done and give it one hell of a clean and get some shot in the sun (fingers crossed)... Quote Link to post Share on other sites
jamesgray Posted April 21, 2015 Author Share Posted April 21, 2015 (edited) Hi All, Well my exedy clutch has been fitted allong with my cat-back stainless and I have just taken delivery of my apexi induction kit..... Can't wait to go home and fit the induction kit... Pics to follow on saturday after a good days cleaning... Happy Days... Edited April 21, 2015 by jamesgray Quote Link to post Share on other sites
Rich-k Posted April 22, 2015 Share Posted April 22, 2015 Awesome man cant wait to hear what it sounds like Quote Link to post Share on other sites
Rich-k Posted April 22, 2015 Share Posted April 22, 2015 Awesome man cant wait to hear what it sounds like Awesome man cant wait to hear what it sounds like Quote Link to post Share on other sites
jamesgray Posted April 23, 2015 Author Share Posted April 23, 2015 Oh it sound's good... Did a short vid of it with no exhaust and wow it was loud... Sounds lovely now tho...have fitted the apexi now...will be over to see ya next Tue mate to pick up the deflectors and the spoiler... happy days... My front left caliper is stuck on now though and binding quite bad...nearly on fire lol... Am going to buy a rebuild kit and refurb em back to new... Quote Link to post Share on other sites
Rich-k Posted April 23, 2015 Share Posted April 23, 2015 Haha send me the vid on fb man awesome dude be good to meet up Quote Link to post Share on other sites
jamesgray Posted June 15, 2015 Author Share Posted June 15, 2015 (edited) Hi All, Finally got my custom straight through stainless exhaust and my Apexi induction kit fitted... It sounds mint... Here are the pics and spec list... Spec ListEngineApexi Air FilterCustom Made Straight Through Stainless Exhaust with 3" tipPainted Rocker CoverMagnetic Sump PlugIridium Spark PlugsChassis15x6.5 Lenso Rs5’sDrivetrainExedy Clutch KitBrakesBlue Painted Callipers and DrumsExteriorDe BadgedDe Bump stripedUKSO DecalsInteriorSony Head Unit To Do ListEngineCorrola ManifoldGet a Custom De Cat Section made (Made By Sean Hibbs)Fit New Cambelt and TensionerFit New PAS Belt & Alternator BeltFit New Fuel FilterFTE Throttle BodyNew HT LeadsNew BatterySilicone Coolant PipesLightweight PulleysNew RadNew Water Pump & ThermostatCoolant ChangeChassisMiesterR Zeta-R CoiloversGlanza Front Strut BraceWhiteline Rear Strut BraceWhiteline Front ARB & Drop LinksWhiteline Rear ARBWhiteline Adjustable Panhard RodWhiteline Anti Lift KitNew Ball JointsNew Track Rod EndsFront Wishbone Poly BushesFront Arm Poly BushesARB Poly BushesBrakesGlanza Front CalipersGlanza Front Discs & PadsGT Rear CalipersGT Rear Discs & PadsGT Hand Brake CablesElectricsUpgraded Earthing KitExteriorGlanza BonnetGlanza Head LightsGlanza Front BumperGlanza Side SkirtsGlanza Boot and SpoilerGlanza Rear BumperNew PlatesWind DeflectorsTow EyesSun Strip (not sure which colour yet)InteriorNew SeatsMomo Steering WheelMomo Boss Kit Momo Gear KnobMomo Hand BrakeNew Gaiters Edited June 15, 2015 by jamesgray Quote Link to post Share on other sites
Rich-k Posted June 15, 2015 Share Posted June 15, 2015 Looks really great mate! Let us know of you still want them parts if not I can put them back up for sale keep the updates comin! Quote Link to post Share on other sites
jamesgray Posted June 16, 2015 Author Share Posted June 16, 2015 Looks really great mate! Let us know of you still want them parts if not I can put them back up for sale keep the updates comin! Cheers mate, Yes I do still want the spoiler and wind deflectors, its been a mad month as I'm up for redundancy but the process is coming to an end now and hopefully I will keep my job... How was Mexico...? Quote Link to post Share on other sites
bdohohh Posted June 16, 2015 Share Posted June 16, 2015 Shaun hibbs?! You must be local to me then mate i want to get my exhaust made there! Where abouts are you? I live in dwygyfylchi about 5 mins from conwy! Progress looks good matey! did you just smash your face into your keyboard to get the name of where you live.... This car is awesome! So clean, I love those wheels Quote Link to post Share on other sites
jamesgray Posted June 17, 2015 Author Share Posted June 17, 2015 did you just smash your face into your keyboard to get the name of where you live.... This car is awesome! So clean, I love those wheels Haha you think his village name is long... The village I live in is called Llanfairpwllgwyngyllgogerychwyrndrobwllllantysiliogogogoch... And I'm not shitting you mate... Cheers mate... It does look clean in the pics mate but it needs some tlc... I am getting a polisher delivered today to get the body mint... Quote Link to post Share on other sites
bdohohh Posted June 17, 2015 Share Posted June 17, 2015 Hahahahaha that's amazing I don't think I could be bothered telling people my address though haha. Aye it looks well in the pics, haha careful with detailing products you'll get addicted Quote Link to post Share on other sites
Rich-k Posted June 17, 2015 Share Posted June 17, 2015 The locals don't even use the full name llanfairPG for short! Mexico is good mate leaving today tho hope all is well with your job pal. When my starlets done well have too meet up for some pics mate! That's if I Ever get to Finnish mine! Always have to spend my money on other things contemplating selling up half the time as I get sick off having to put it on hold haha Quote Link to post Share on other sites
redz11 Posted November 17, 2015 Share Posted November 17, 2015 mmm I need a shaun hibbs exhaust in my life... bored of the japspeed... gunna see if he`ll make me an exhaust mani too you still live in Llanfair PG bud? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.