Jump to content

Recommended Posts

Hello,

I have had my glanza now for not quite a year here is how she looked initially

http://s751.photobucket.com/user/lee77richardson/media/null_zps6cd329b2.jpg.html]null_zps6cd329b2.jpg

This is the supposed race-tech prepared engine bay. I brought this from a member on here who has been getting some stick from others as he has sold about 5 cars since I bought mine and refuses to be classed as a trader

null_zpsd53e879a.jpg

Nice bay not the manifold was held in by one bolt. But no problem as the bodywork on the car and the rest of the engine was in good nick.

Edited by LDouble
Link to post
Share on other sites

My iPad will not let me load up more than I pic at a time so sorry for the multi posts grrrr!

Well I wanted to get to a couple of shows this year last year I went to JAE and thought it was great so I'm planning to go on the stand this year. So in preparation I have been collecting some parts as follows

imagejpg9_zps0c916588.jpg

F0DC589E-33F3-499B-837B-F06399C6B688_zps

Deans work is awesome!!

I also picked up a Tongs hybrid turbo from Shaun which was brand new I didn't take a pic though sorry!

Edited by LDouble
Link to post
Share on other sites

So started to fit some of the parts together and also contacted Keith @ Zisco and got a ram manifold to go with the tongs and my short route hot pipe & blitz super sound dump valve and a new rad too

b958220e-0434-40d6-917c-9c7b533f6e40_zps

And relocated air filter kit as well

D8C9F3B0-5D2A-4A36-8108-90F32029F5FC_zps

Also picked up a new front strut brace from Keith as well

0025f0f0-ac94-4a9c-86e5-9c880caf16a1_zps

Edited by LDouble
Link to post
Share on other sites

Also the new brakes didn't fit under these alloys

1EACFB93-855A-48A3-A61B-9878D5657BB4_zps

That gave me an excuse to get these I'm after some Volks Rays but they will have to wait until next year now

7F89F9A0-894D-4723-BDC9-764C963FD58A_zps

Edited by LDouble
Link to post
Share on other sites

Thanks to everyone who has had a look at my progress so far. I did promise to update yesterday but I didn't get a chance to get to the garage. I will be going over this afternoon though so I shall get some fresh pictures up.

I must also say thanks to id-workz who I have bought some new rear disks & headlamps from.

Here is a pic of one side fitted but the rear calipers have gone rock solid so had to get another set from Browner EPP

imagejpg14_zps26005bee.jpg

imagejpg13_zps40b131d0.jpg

I also sourced a new front bumper with the front lip 96spec as well here is a little pic of it in the new colour

CBF8A26A-5F78-4CB0-BE24-BFDB82DC9918_zps

Edited by LDouble
Link to post
Share on other sites

Looking forward to seeing what you do with this. :)

Thanks mate. I also need to get time to fit the exhaust I got from you. But some one has done a proper cowboy job on the current one so I probably will have to wait until after Japfest to get that sorted out

Link to post
Share on other sites

Top job on that mirror!

Good progress so far mate, get these painted pictures up ASAP!

Ha yeah I know yee ha job on the wing mirror. I also have to say your id-workz jam style bumpers fits very nicely indeed as well. I bought your old demo car one off of Danny on here.

Some updates pic wise

31CF7AF5-0789-4925-89DF-EFA14C4F10FD_zps

I also thought I may as well put a pair of these in as well

98C302C2-EB68-47B8-B8B7-8AF7787BC250_zps

Mounted on these

9D03E5D2-632F-4820-A2A2-7B845709AF47_zps

She is almost there now just needing a polish or two now I thought I would finish it up a little different what do you all think?

7C4E7CA2-CC86-4EE2-98AE-A2524F119837_zps

B20D31B3-C25C-41C9-97F0-0ED3468A5514_zps

609AE97C-C667-45EE-84E6-2F24292BB434_zps

Edited by LDouble
Link to post
Share on other sites

Thanks for the comments. I thought that might be the case I knew I should of gone for the flames down the sides instead :)

The colour is a honda one vivid blue it looks much better in the sunlight.

I put the orange on there it reminds me of the Gulf racing logos something a bit different.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...