fremyjay Posted May 7, 2014 Share Posted May 7, 2014 Looking for a spec paddle clutch alignment tool, the plastic thing you get with your clutch, let me know if you have one Link to post Share on other sites
akyakapotter Posted May 7, 2014 Share Posted May 7, 2014 Why don't you just use a socket mate Link to post Share on other sites
rob_bower Posted May 7, 2014 Share Posted May 7, 2014 Just use a socket as above. Link to post Share on other sites
rwdrev Posted May 7, 2014 Share Posted May 7, 2014 i dont use anything, i either go by eye or, line the outside edge of the drive plate with the pressure plate, works every time. Link to post Share on other sites
daniel_g Posted May 7, 2014 Share Posted May 7, 2014 End of a ratchet and a good eye for most boxes Link to post Share on other sites
fremyjay Posted May 8, 2014 Author Share Posted May 8, 2014 Okay cheers guys Link to post Share on other sites
Cushion Posted May 8, 2014 Share Posted May 8, 2014 I recently done mine and used a 15mm deep socket (15mm iirc, maybe 17mm) and it was near enough spot on Link to post Share on other sites
Recommended Posts