WallaceGlanza Posted February 16, 2015 Share Posted February 16, 2015 (edited) Finally decided to break my glanza so everything on it will be available, most parts will be removed tomorrow. I'll get photos of all parts as required. Prices are fair and firm, I don't have time to have long conversations with people who can't pay until their granny's inheritance gets delivered so if you want the parts you need to have the cash. Everything is sold as seen but all working properly when removed. Item's & Pricing For Sale:Stock glanza 4efte fully rebuilt 1500mile ago - (SOLD)Standard GT gearbox, low mileage 73k, No crunches. - (SOLD)Solid brass shifter cable bushes (pair) - £15XS Power Front Mounted Intercooler kit with short pipe route to suit CT9, no bumper cutting required - £80 Apexi Filter Induction and Relocation Kit to suit CT9, relocates filter to front grill - (SOLD)Standard CT9 and standard actuator (Refurbished unit by midlands turbo done approx 40k miles) - £80HKS Actuator - (SOLD)Road Runner CT9 Exhaust Manifold - (SOLD)Blitz Decat and lambda - £120Custom Straight Through Stainless 2.5” Exhaust with Trust Power Extreme II Back Box Fully Heat Wrapped - (SOLD)NGK Blue Leads -£30 Walbro 255lph Fuel Pump (Complete assembly ready to fit) - (SOLD)SARD RRFPR c/w gauge, fuel rail adaptor and hoses (Original box and instructions too)- (SOLD)SARD R2D2 Dump Valve - (SOLD)40mm thick Aluminium Radiator with Pacet Fan - (SOLD)GReddy Emanage Blue with ignition and injector harness and custom carbon fascia for centre console - (SOLD)Blue earthing kit - (SOLD)Custom catch can (proper demister pad inside and 3rd port) with silicone hoses (fluoro lined) - (SOLD)Drivetrain:TC Short Shift Kit (full assembly)- (SOLD)Exedy Clutch kit (Brand new standard jobbie, done 100 miles!) - (SOLD)Chassis:MeisterR Zeta R Coilovers -(SOLD)Whiteline Anti-lift Kit -(SOLD)Whiteline Pan-Hard Rod (seized!) - £40Poly Bushed ARB Drop Links (Brand new done 100 miles) - (SOLD)Powerflex Poly Rear Axle Bushes - (SOLD)Powerflex Poly Engine Mounts (Full units ready to bolt in, edge of gearbox bush slightly melted) - £80Earl's Braided Brake Lines full kit (x4) replaces both rear hoses - £50ABS Removal kit (Hard pipe kit) - (SOLD)10mm Wheel Spacers - £20Interior:Evo 7 Recaro Seats, very good condition will bolt straight into an EP91 -(SOLD)Pioneer DEH-P6750MP Headunit and Pioneer TS-E1076 front speakers - £80Exterior:Genuine Cruise Power FRP Bonnet with Locking Aerocatches (Slight crack down one side and some stone chips) - £300‘98/’99 Front Bumper with genuine OEM splitter smoothed in and foglights, grill and brackets to bolt straight onto a 96/97 EP91- (SOLD)‘98/’99 Clear Front Indicators and proper housing, comes with silvatec bulbs - (SOLD)JDM Reflet Rear Light Clusters, full units with bulbs - (SOLD) Those are just the mods but everything on the car will be available when removed. Pictures: Payment & Shipping Details: To be arranged with buyer, buyer pays any fees. Smaller items can be posted. Parts can be collected from Angus, Scotland Edited July 4, 2015 by WallaceGlanza Quote Link to post Share on other sites
Ollieh17 Posted February 17, 2015 Share Posted February 17, 2015 Ill take the rear beam bushes mate Quote Link to post Share on other sites
jimmymac101 Posted February 17, 2015 Share Posted February 17, 2015 so sad to see James Quote Link to post Share on other sites
RobSR Posted February 17, 2015 Share Posted February 17, 2015 Hi mate,Interested in the abs removal to save me building my own. Is it done with original today parts or homemade so to say?Full details appreciated ! Quote Link to post Share on other sites
Scoobysvx Posted February 17, 2015 Share Posted February 17, 2015 I'm also interested in the abs delete kit Quote Link to post Share on other sites
Glanza_J Posted February 17, 2015 Share Posted February 17, 2015 Hi mate, do you have the front wings by any chance? Quote Link to post Share on other sites
Charlie28 Posted February 17, 2015 Share Posted February 17, 2015 PM'D Quote Link to post Share on other sites
WallaceGlanza Posted February 17, 2015 Author Share Posted February 17, 2015 Ill take the rear beam bushes mate Ok. Once I have them off will let you know and take it from there so sad to see James I know but needs must Hi mate, do you have the front wings by any chance? Yup, they will both be available, I'll some photos once they're off. Quote Link to post Share on other sites
jimbox1 Posted February 17, 2015 Share Posted February 17, 2015 Where are you based mate could be untreated in the bonnet? Quote Link to post Share on other sites
WallaceGlanza Posted February 17, 2015 Author Share Posted February 17, 2015 Angus,Scotland. Willing to travel with it too within reason as really don't want to post the bonnet. Quote Link to post Share on other sites
jimbox1 Posted February 17, 2015 Share Posted February 17, 2015 (edited) I stay in fife so not far, how bad is the crack?Is it a genuine cruise? Edited February 17, 2015 by jimbox1 Quote Link to post Share on other sites
WallaceGlanza Posted February 17, 2015 Author Share Posted February 17, 2015 Yeah could easily meet you. It is 100% genuine,shorty on here had it imported himself before the replicas came out.I'll get some photos for you tomorrow but its not bad. Quote Link to post Share on other sites
_shaun_ Posted February 17, 2015 Share Posted February 17, 2015 What u after for the door cards? Quote Link to post Share on other sites
jimbox1 Posted February 17, 2015 Share Posted February 17, 2015 Ok mate intrested in it, pm me pics when you get the chance Quote Link to post Share on other sites
fordie_glanzaV Posted February 17, 2015 Share Posted February 17, 2015 Rear brake pad fitting clips mate? Quote Link to post Share on other sites
mitchell.mills.10 Posted February 17, 2015 Share Posted February 17, 2015 Pmed Quote Link to post Share on other sites
Liam_D Posted February 17, 2015 Share Posted February 17, 2015 Would you post the Bonnet? Quote Link to post Share on other sites
Bluebear Posted February 17, 2015 Share Posted February 17, 2015 End of an era Quote Link to post Share on other sites
OJB Posted February 18, 2015 Share Posted February 18, 2015 I'll take EMB pm coming your way Quote Link to post Share on other sites
kevmcc90 Posted February 18, 2015 Share Posted February 18, 2015 Pm'd about gearbox mate Quote Link to post Share on other sites
WallaceGlanza Posted February 18, 2015 Author Share Posted February 18, 2015 What u after for the door cards? Provisionally sold mate, will let you know if they don't go though. Rear brake pad fitting clips mate? Would rather sell the whole rear brake assemblies complete. Pmed Replied and also replied to your last two pm's.... Would you post the Bonnet? Sorrry Liam I'd really rather not, it got damaged last time and is very fragile! End of an era I know! I must admit to getting a bit emotional ripping it apart today! Quote Link to post Share on other sites
WallaceGlanza Posted February 18, 2015 Author Share Posted February 18, 2015 Hi mate, do you have the front wings by any chance? Wings are in good condition, some stone chips and a couple of small scuffs barely visible, the drivers side has a slight rust bubble on the lip which was touched up but has come back. Both sides are also a bit rusty right at the bottom but the sideskirts cover this area: This one looks a lot worse in the photo!!: Quote Link to post Share on other sites
WallaceGlanza Posted February 18, 2015 Author Share Posted February 18, 2015 I stay in fife so not far, how bad is the crack?Is it a genuine cruise? Bonnet is generally very good with minor stone chips. The back corners were both damaged when it was posted to me, I smoothed these back and touched up they just don't come to a point like they should: The crack is down the passenger side edge, it could be filled and re-painted easily but id barely visible when the bonnet is down: Quote Link to post Share on other sites
Ryan_EP82 GT Posted February 19, 2015 Share Posted February 19, 2015 I've a roadrunner manifold fitted atm absolutely love it! Free bump for a sweet rare mani Quote Link to post Share on other sites
Glanza_J Posted February 19, 2015 Share Posted February 19, 2015 Bonnet is generally very good with minor stone chips. The back corners were both damaged when it was posted to me, I smoothed these back and touched up they just don't come to a point like they should: The crack is down the passenger side edge, it could be filled and re-painted easily but id barely visible when the bonnet is down: how much for these posted mate?sorry i meant the wings Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.