EJay Posted March 27, 2015 Posted March 27, 2015 Ok so I'm running standard ct9 witch is on its way out as its starting to make a scweeling noise, I have "Blits active clutch" isit supose to make that grinding noise ? But any way do Yh I got the clutch in, i ordered m/s ram horn style manifold with decat and side exit, so wat else do I need ?? I got the TD04L I know I need a front nount and a civic half size radiater, and I'm goin to try get emanage blue ultimate if not then jus Emanage blue unless there's any other good piggy back ecu's ? Soo Yh is that all I need ? Wat about fuel pressure regulater ? But I thirt with that piggy back Ecu I shouldn't need that please help I want her to run safely and properly ...... Peace Quote
5e colin Posted March 27, 2015 Posted March 27, 2015 thats wel beyond stage 1 ha ha ad bigger injectors to your list Quote
Ollieh17 Posted March 27, 2015 Posted March 27, 2015 Use the search bar mate, or look in the wiki everythings in there Quote
EJay Posted March 27, 2015 Author Posted March 27, 2015 But I want to get to a safe leval as I don't have funds to forge her ? Quote
Nanglebadger Posted March 27, 2015 Posted March 27, 2015 http://www.ukstarletowners.com/page/articles.html/_/tuning-4efte/stage-1-200bhp-stock-engine-stock-turbo-r35 Phil. Quote
EJay Posted March 27, 2015 Author Posted March 27, 2015 Wiki ? U mean Google it ... Wiki leaks ?? Quote
Matt1878 Posted March 27, 2015 Posted March 27, 2015 There is no such thing as a 'stage' .. its all bullshit. Use the Wiki within the forum... It has all you need to get close to 200bhp on a ct9... for any more power safely, you will need to upgrade to a TD04. Running 1 bar on a TD04 you will see very good results and it will be safe if mapped properly.. Stock CT9... 200hp guide... http://www.ukstarletowners.com/page/articles.html/_/tuning-4efte/stage-1-200bhp-stock-engine-stock-turbo-r35 Quote
EJay Posted March 27, 2015 Author Posted March 27, 2015 What bhp is safe I have tdo4l and hje do I get to that forum without clicking the link U jus sent ... I jus cheked it out and was very helpful !! power hungry animal aha Quote
EJay Posted March 27, 2015 Author Posted March 27, 2015 Also my glanza has seen roughly 120000 miles on the standard ct9 how long do these engines go on for roughly obv depending on how U drive em and look after them but roughly ? Specially if I'm iprgrading to tdo4l and all that ..... Cheers fellers that's my last question for now then U can all carry on with your day aha Quote
EJay Posted March 27, 2015 Author Posted March 27, 2015 Wen she's all set up Ohh man I'm join to need a few pairs of boxers aha Quote
5e colin Posted March 27, 2015 Posted March 27, 2015 thats 200.000km best to replace conrod bearings for peace of mind you can do that urselve if you have tools and a micrometer to check the bearing thicknes Quote
Phil Posted March 27, 2015 Posted March 27, 2015 your first post describes stage 1a perfectly. Phil Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.