fordie_glanzaV Posted May 30, 2015 Posted May 30, 2015 I done a search but not found my answer.. Obviously know u can by the removal kits. But whats people done with the abs plugs off the loom?Gunna b tidying up the bay on the new project so just getting ideascheers Quote
akyakapotter Posted May 30, 2015 Posted May 30, 2015 Mine are still there pushed though the hole lol would love to just chop them all out but to scared to Quote
fordie_glanzaV Posted May 30, 2015 Author Posted May 30, 2015 I wanna chop them off the loom too. But feel there must b more to it.. lol Quote
akyakapotter Posted May 30, 2015 Posted May 30, 2015 I wanna chop them off the loom too. But feel there must b more to it.. lolThere is loads apparently Quote
fordie_glanzaV Posted May 30, 2015 Author Posted May 30, 2015 What did u use on the ends. Taped up and taped back in the loom? Quote
Ollieh17 Posted May 30, 2015 Posted May 30, 2015 Yeh just untaped the loom, cut them up taped the ends Nd rewrapped in loom tape Quote
fordie_glanzaV Posted May 30, 2015 Author Posted May 30, 2015 Ideal might give it ago when loom goes back in. Cheers mate Quote
jellybaby Posted May 31, 2015 Posted May 31, 2015 Done mine all way to fuse box then removed the fuse. Also drivers side there b the abs modal which u can removed and then remove all the wires running down the seal as the rear lights etc run off the loomThat runs below the centre consol Quote
fordie_glanzaV Posted May 31, 2015 Author Posted May 31, 2015 I dont think ill b taking them back to the fuse box.. unless i have to.. Take plugs off protect ends and wrap into loom i thinks cheers Quote
Maxep Posted June 2, 2015 Posted June 2, 2015 I just tucked mine through the hole, although removing them would be ideal Quote
jellybaby Posted June 3, 2015 Posted June 3, 2015 I dont think ill b taking them back to the fuse box.. unless i have to..Take plugs off protect ends and wrap into loom i thinks cheersthat's fair enough but it just a option as I completely removed all the loom for the abs and the amount of crap u end up is shocking but handy for me as I use the good wire to repair worn parts of my engine loom lol Quote
fordie_glanzaV Posted June 3, 2015 Author Posted June 3, 2015 I dont feel to keen enough diving into the ecu. Lol. Just wanna take out the shit thats not needed and tidy up wiring.. ill be happy then...tempted to do pas removal or relocate using saxo pump. Quote
Ollieh17 Posted June 3, 2015 Posted June 3, 2015 I have a saxo pump and loom i never got round to fittinf before breaking the glanza Quote
RobSR Posted June 3, 2015 Posted June 3, 2015 Abs doesn't run to the actual engine ecu, it has a separate unit under the dash - drivers side. chop it all out and remove that. Im running a saxo/106 electric pump too. its not hard to wire in / fit. Quote
fordie_glanzaV Posted June 4, 2015 Author Posted June 4, 2015 Oh really. Might have to have a search for the abs unit then.Cheers fella Quote
daniel_g Posted June 4, 2015 Posted June 4, 2015 The wiring for the ABS ECU runs up the OS wing, if you remove it then you'd be best to seal up the grommet which the wiring goes through into the car. The ABS ECU is held in by a couple of 10mms kinda above where your right knee is. Quote
fordie_glanzaV Posted June 4, 2015 Author Posted June 4, 2015 Ideal thank u very much.. I've removed that part of the loom and the grommet so guessing its the unit thay it was plugged into? Quote
daniel_g Posted June 4, 2015 Posted June 4, 2015 Probably would have been yeah, would have had 2 big white multiplugs on it Quote
fordie_glanzaV Posted June 4, 2015 Author Posted June 4, 2015 Yeh thats the 1s.. look into ripping that out then Cheers fella Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.