morgan Posted August 10, 2015 Share Posted August 10, 2015 http://id-workz.co.uk/honda/jazz/gauges/prosport-evo-lcd-series/52mm-evo-lcd-red-blue-wideband-afr-kit-with-outputLooking to get this wide band kit from ID-woks and just wanted to see if anyone has one fitted? Are they any good?What does the range of 10.0:1 to 20.0:1 mean?What is the 0-5v out put for ? Any help would be great Thanks 😊 Quote Link to post Share on other sites
akyakapotter Posted August 11, 2015 Share Posted August 11, 2015 Would personally go for one of these Quote Link to post Share on other sites
patman Posted August 11, 2015 Share Posted August 11, 2015 I have an AEM wideband mate just red to live feed, black to ground, I don't use the 0-5v output, think that's for datalogging, something like that, 10 is very rich, 20 is bloody lean, on starlets your looking for around 11.5 at WOT (that's when the throttle is wide open) lots of info on here if you type in the search bar wideband Quote Link to post Share on other sites
morgan Posted August 11, 2015 Author Share Posted August 11, 2015 Thanks guys, I was looking at the ID-workz one because I'm going to be changing all of my gauges so they match, would there be any problems using this one instead of the INNOVATE? Quote Link to post Share on other sites
Ollieh17 Posted August 11, 2015 Share Posted August 11, 2015 Wouldn't have thought so, it still uses a good quality bosch sensor Quote Link to post Share on other sites
morgan Posted August 11, 2015 Author Share Posted August 11, 2015 Wouldn't have thought so, it still uses a good quality bosch sensorThat's what I was thinking but don't wana put it in and people say they are not accurate or reliable Quote Link to post Share on other sites
Phil Posted August 11, 2015 Share Posted August 11, 2015 Innovate is what I useHave heard opinions for and against innovate and AEMNot much in it I wouldn't thinkPhil Quote Link to post Share on other sites
gorganl2000 Posted August 13, 2015 Share Posted August 13, 2015 innovate for me....proper kit with no issuessome of my friends use aem and no problems as well Quote Link to post Share on other sites
Stu Posted August 13, 2015 Share Posted August 13, 2015 Ive had my Innovate unit for 10 years or more - can't fault it really. 0-5v output can be fed to some ecus so that you can datalog AFR against map etc. 10:1 to 20:1 is just its operating range ie 10AFR to 20 AFR. Innovate at 7.3 to 23 from memory. Quote Link to post Share on other sites
Idrees Posted August 13, 2015 Share Posted August 13, 2015 That's what I was thinking but don't wana put it in and people say they are not accurate or reliable Certainly not the case mate, it's a good kit with warranty supplied Quote Link to post Share on other sites
gorganl2000 Posted August 13, 2015 Share Posted August 13, 2015 http://www.2gnt.com/documents/teklein_Wideband_Shootout.pdf that's an old test you can look at the results...may be useful though a bit dated now that's what i read before i bought my innovate ages ago Quote Link to post Share on other sites
morgan Posted August 13, 2015 Author Share Posted August 13, 2015 Thanks everyone I think I'm going to look in to the prosport a bit more as I would like everything to match (OCD I know lol) idrees are you running one ? In your ep91 ? Quote Link to post Share on other sites
Idrees Posted August 13, 2015 Share Posted August 13, 2015 Not yet mate, I have the ProSport gauges but no wide band yet. I'll have one fitted in time for my new engine build next year Quote Link to post Share on other sites
GlanzaV33 Posted August 24, 2015 Share Posted August 24, 2015 Are you guys still running you Oem lambda sensors ? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.