muin1331 Posted October 2, 2015 Author Share Posted October 2, 2015 few updates! Changed my intercooler to a blitz one...now the piping has a more direct route from the compressor to intercooler . also got the new bov in place! the lads down here painted the piping nicely! ill clean the intercooler out when the car is home, here's hoping for boost this month! Quote Link to post Share on other sites
muin1331 Posted October 12, 2015 Author Share Posted October 12, 2015 well this weeks update isnt as what I thought, bittersweet actually....alot of smoke was puffing out the exhaust and after final inspection it was the valve stem seals Lads at GP are going to uprate the springs and properly port and polish the head Prior to the head being removed I switched to ej20 Subaru coils, dizzy cap was removed and a custom cap was made as a cover to tidy everything up! looks clean! Apexi airfilter was also put in place then all this happened Pretty devastating, but looking into the bright side I can properly have the top end fixed . All because of cheap valve seals used previously haha Pretty clear seeing the oil on the pistons caused by the oil leaking through the seals down the valves....head was off in a matter of minutes and should be back together this week . New gasket on the way from my friend Elton so compression will be lowered to push abit more boost in Quote Link to post Share on other sites
muin1331 Posted November 14, 2015 Author Share Posted November 14, 2015 so alot has hapened since my last post, turned out that the old place stuffed up my piston clearence causing all mayhem inside the engine everything has been taken out and I have took back out the whole engine, everything has been rebuilt from top to bottom just after a year the scorn piston, after further inspection the piston rings cracked.... Unfortunately I don't have much pictures of the rebuild, but I am running the 4e again with forged internals and the td05....... I'm using a 2.0mm gasket, increace the compression slightly hahachanged the colour of the valve cover aswell, going to try and make everything black now Quote Link to post Share on other sites
Sheehy StarletGT Posted November 14, 2015 Share Posted November 14, 2015 Great work lad. Very nice car Quote Link to post Share on other sites
muin1331 Posted November 17, 2015 Author Share Posted November 17, 2015 Great work lad. Very nice car thanks Sheeny! got a ton of things to update on haha Quote Link to post Share on other sites
muin1331 Posted November 22, 2015 Author Share Posted November 22, 2015 sorry guys i meant to type 5E haha, the cars was on the dyno last week and here is the results I haven't got the car back yet as there is a few more little bits to do, so hopefully next week I can take her out to try with some friends! this was pre dyno So my dad and a few friends came to see the final results....after almost 2 years of blood, sweat, tons of headbutting she was finally on the Rollers.....all that has happened pre to this stage was gone. Gp Racing did an amazing job over here, and I'm glad I went to them in the end or my engine would of stuffed up without a doubt! she developed a miss at high rpms, but was found out to be the coil....so swiched it out and she ran smooth as butter! this was at 1.2 ish bar so we pushed up the boost up to 1.5 and she reached the near 300whp got home and then my friend Ati messaged me with this....1.8 bar and running more power than I had ever thought....326.5whp, 39kg's of torque...unfortunately the powerband drops at 6500 rpms...I assume its the cams that are letting up...I was planning on getting some 5efhe cams as they have slightly better lift...any comments and thoughts are welcome as I am improving her along the way....all in all I'm extremely pleased with the result and new rebuild even though its only been 1,000 + km's since the last one .I'd love to share my vids but I'm not sure as to how you download them, some help from you guys would be great . I'll get more updates next week as we might possibly try 2.0bar haha....tyres are total shit, but they smoke pretty well Quote Link to post Share on other sites
Sudden Posted November 24, 2015 Share Posted November 24, 2015 5e block? Are the cams timed to the 5e mark? Retarding the cams slightly by timing them to the 4e mark shifted my powerband very nicely, (fhe cams in an n/a build) Quote Link to post Share on other sites
muin1331 Posted November 24, 2015 Author Share Posted November 24, 2015 5e block? Are the cams timed to the 5e mark? Retarding the cams slightly by timing them to the 4e mark shifted my powerband very nicely, (fhe cams in an n/a build) yup its a 5e block and the timing I'm not sure about, ill check tomorrow when I see the car, but thanks for your help man! I'm using the stock 4efte cams atm, but I have been offered a set of 5efhe ones haha... Quote Link to post Share on other sites
muin1331 Posted December 3, 2015 Author Share Posted December 3, 2015 So i have a few updates....got a few parts bought! - set of proper seat rails- gt cooling panel- rear view mirror (no pic yet) Car is still in the shop, but none the less she will be on the road very very soon! Not sure of the brands but I hope I can make them fit! cooling plate, all wrapped up...ill get a photo when I install it though So the brakes have been modded to fit the 15's back on, grinded down the caliper slightly to fit the rim on haha! She sits well on these rims...slightly lower than when I was using the 16 inch ones, but the tyres are much easier to find and hopefully ill get a set of toyo r888's next week Ati sitting in the driver's seat...great mechanic, certainly one of the best from over here Spotted this beauty outside! R32 GTR....freshly imported from Japan...owner must be really lucky! Plans are to make her run...due to head over to New Zealand on feburary for a few years...I will certainly miss my starlet! ill come back once in awhile and hopefully have some parts to make her faster . I do intend to get a EP91 over there HOPEFULLY! then ill have another build to share haha.... Does anyone here know how to upload vids? I have quite a few that would be great to share with you all! Quote Link to post Share on other sites
jiggaman_16 Posted December 25, 2015 Share Posted December 25, 2015 I absolutely love it bro........ 300+ whp from a TD05 5E is totally acheivable wen done right. & u did Thats the aim i have for mine too .... Borg Warner GM-5 turbo, 5E, keepin my fingers crossed. Enjoy it until Feb. Quote Link to post Share on other sites
muin1331 Posted January 6, 2016 Author Share Posted January 6, 2016 I absolutely love it bro........ 300+ whp from a TD05 5E is totally acheivable wen done right. & u did Thats the aim i have for mine too .... Borg Warner GM-5 turbo, 5E, keepin my fingers crossed. Enjoy it until Feb. Thanks man! i've finally got her home, will be back on the dyno next week as she is abit too rich haha....your car will be a beast with the borgwarner happy boosting! Quote Link to post Share on other sites
MustakimQZ Posted January 6, 2016 Share Posted January 6, 2016 Well done with the build dude. I can see plenty of blood, sweat, tears and money thrown into your effort. Been slowly doing up my GT as well here in KL but nowhere near your levels. Quote Link to post Share on other sites
muin1331 Posted March 4, 2016 Author Share Posted March 4, 2016 Well done with the build dude. I can see plenty of blood, sweat, tears and money thrown into your effort. Been slowly doing up my GT as well here in KL but nowhere near your levels. that's great to know someone else from Malaysia is here! set up a build, would love to see your gt man Quote Link to post Share on other sites
muin1331 Posted March 4, 2016 Author Share Posted March 4, 2016 Haven't had much time to update the build....I'm all the way in New Zealand now, managed to drive her for a good month and did a few little odd jobs to clean her up abit! miss her badly but I do plan to get another ep in the next few months, fingers crossed Quote Link to post Share on other sites
muin1331 Posted March 7, 2016 Author Share Posted March 7, 2016 So I'm all the way in Kiwi Land right now, away from the Ep unfortunately but studies are more important! I got the car back late December last year and I did a few odd jobs to her before I came. Had a good few amazing gatherings so pictures below! A view of the bay! prior to going for the first test with semi's and 1.7bar of boost Was out to my friends Detailing shop opening....makes the Ep look a lot nicer next to these haha...Bro in laws Vspec 2 and a friends Megane Rs Took the car home about a week later after final tuning and I bought a few goodies to clean her all up! After some much needed TLC, was using the car as my daily for the time till I shifted over here, was the best feeling to drive her this much after 2 years of mishaps, but I can say it was worth the wait!! Quote Link to post Share on other sites
muin1331 Posted March 7, 2016 Author Share Posted March 7, 2016 Stripped out the boot and gave it a fresh lick of paint due to some rust spots took out all the trim was thinking of permanently removing the trim, was surprised with the weight of all this..but I fit it all back...streetcar I guess haha before I scrubbed down everything Found hidden rust behind the rubber seal, so got the grinder out and got rid of it! Put everything back together and I was pretty happy with the result Removed the tail lights and cleaned out everything All clean! Polished the lights aswell, not a huge difference but cleaner! I love glowbages Got her wet afterwards Quote Link to post Share on other sites
muin1331 Posted March 7, 2016 Author Share Posted March 7, 2016 Cockpit view! Car ran great throughout...boost was at 1.5bar due to missing after 1.6. Decided to run lower because I wanted to drive her as much as possible with the little time I had left. Antilag was a lot of fun and the launch scares me to death! Definitely need a lsd, new bushings and better suspension!! Quote Link to post Share on other sites
muin1331 Posted March 7, 2016 Author Share Posted March 7, 2016 went out with my good friends for the first time, had an absolute blast! Quote Link to post Share on other sites
muin1331 Posted March 7, 2016 Author Share Posted March 7, 2016 the car scene is growing here, lots of rare imports coming in with new laws allowing only a limited amount of Japanese cars to be brought in, but sadly you have to be a licensed dealer with the appropriate certification, never the less I was out on my birthday to a large meet where I saw a large amount of Jap Goodness!!! car porn! haha, a lot of great cars out that night, loud exhausts,bov's and dumped out wastegates! all lined up, starlet was surely the underdog in looks but I must say she really stunned a lot of guys that night....1 for the starlet boys line up of FD RX7's summed my night with a great exit, was like something from a movie when leaving, but I love how she is on par with performance amoung higher capacity cars! lucky to be able to share my Malaysian car culture with all EP owners! they are truly under estimated Pocket Rockets! Quote Link to post Share on other sites
muin1331 Posted March 7, 2016 Author Share Posted March 7, 2016 last night in Malaysia I was out with my usual squad, night life is amazing there, speeding is a breeze with the lack of speed camera's haha. although the road quality is pretty ridiculous, you can easily find a few roads that allow you to throttle the shizel out of your car! Toyota Legends!! Squad goals! bittersweet moment for me... Quote Link to post Share on other sites
muin1331 Posted March 7, 2016 Author Share Posted March 7, 2016 managed to drive her on the way to the airport, one last ride I guess...but I will be back behind the wheel of her in December, plans to get another starlet over here, I just can't pick any other car! heart is set, 82 or 91... still in the process of what to get, decisions decisions . Next on the list is: - Full bushings- LSD- Cams...hopefully 270+ degree- Suspension (tein or anything better than what I have now)- semi's for the back too- and hopefully a set of Enkei RPF1's As a car nut the project will never end, perhaps I might just shove in a 3sgte and run full 4wd....who knows what the future will bring, I will continue to update when she has work done while I'm gone....But in my opinion, if you want to have an outrageous power to weight ratio and reliability. I would always choose a starlet. solid engines and they hide a massive amount of potential! Quote Link to post Share on other sites
JamesD89 Posted March 7, 2016 Share Posted March 7, 2016 Great build mate, use youtube to upload your videos and link them in your post. Quote Link to post Share on other sites
muin1331 Posted March 8, 2016 Author Share Posted March 8, 2016 Great build mate, use youtube to upload your videos and link them in your post. thanks man! will try upload a few vids, see what I have in my storage haha Quote Link to post Share on other sites
MustakimQZ Posted March 9, 2016 Share Posted March 9, 2016 Awesome update dude. 1.5 bar is still nuts. So what power you got out of it? Quote Link to post Share on other sites
muin1331 Posted March 9, 2016 Author Share Posted March 9, 2016 Awesome update dude. 1.5 bar is still nuts. So what power you got out of it? haha, thanks man....1.5 runs around 300whp, when I get back I should have new cams and hopefully I can push her abit more! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.