chris84 Posted September 22, 2015 Share Posted September 22, 2015 Right guys ive found some one who can make adjustable panhard rods for the starlet but he is hesitant as he is unsure of the matket for them. He said they would likely come in at under £100 complete with bushes and hardware and also powder coated Quote Link to post Share on other sites
lukEp Posted September 22, 2015 Share Posted September 22, 2015 You can pick them up brand new for about £100 so tell him not to bother. An adjustable rear X brace or b pillar/harness bars will be better. Quote Link to post Share on other sites
Fozzie Posted September 22, 2015 Share Posted September 22, 2015 To be fair, his sample Ford ones that he makes look much better quality than the crappy Whiteline one.If it undercut by £30 odd he'd probably do ok out of it. Quote Link to post Share on other sites
chris84 Posted September 22, 2015 Author Share Posted September 22, 2015 His ford ones are good a few of my mates have them Quote Link to post Share on other sites
5T4R7ET N/A Posted September 22, 2015 Share Posted September 22, 2015 Get some pictures and reviews of his work and create a group buy. He might be able to do them cheaper if you get 10 people?I think you have to ask admin for permisson on group buys? Quote Link to post Share on other sites
morgey Posted September 22, 2015 Share Posted September 22, 2015 As above group buys can only be run by traders. Get some pics up of the ford ones. If they were made adjustable on car, like the cusco/rsr ones, that would be good plus if its cheaper than the rest its something we could look at if he was interested. Quote Link to post Share on other sites
chris84 Posted September 22, 2015 Author Share Posted September 22, 2015 Once he has measurements he would be able to make them to order at around £60 pound he said i think im going to use my car as a guinea pig as i want some other stuff Quote Link to post Share on other sites
5T4R7ET N/A Posted September 23, 2015 Share Posted September 23, 2015 (edited) £60 sounds like a very good price to me, especially if it adjustable on car like rsr and cusco.Let use know how it goes.He must do other parts as well? Edited September 23, 2015 by 5T4R7ET N/A Quote Link to post Share on other sites
chris84 Posted September 23, 2015 Author Share Posted September 23, 2015 £60 sounds like a very good price to me, especially if it adjustable on car like rsr and cusco.Let use know how it goes.He must do other parts as well?Im going to be taking my car upto him at some point soon and get some bits made he can do custom coil springs aswell mate for coilovers or just lowering springs he is an engineer so he is capable of quite a bit Quote Link to post Share on other sites
Calum122 Posted September 27, 2015 Share Posted September 27, 2015 I got a Brand New Cusco Pan Hard Rod for around £60. In fact I got this lot for £330. Cusco Front and Rear Carbon Struts, £90 each New. Cusco Lower Arm Brace £30 new and the Cusco Pan Hard Rod. I haven't fitted the rest yet. But it is all legit. Quote Link to post Share on other sites
glanzadude Posted September 27, 2015 Share Posted September 27, 2015 ^^^ where did you buy them for so cheap? Quote Link to post Share on other sites
glanzadude Posted September 27, 2015 Share Posted September 27, 2015 ^^^ where did you buy them for so cheap? Quote Link to post Share on other sites
Calum122 Posted September 27, 2015 Share Posted September 27, 2015 Japan lol. Quote Link to post Share on other sites
Whitenoize Posted September 27, 2015 Share Posted September 27, 2015 Well worth getting your own stuff from Japan I'm sure them Cusco braces are over 200 each on I'd-workz 😂 Quote Link to post Share on other sites
Calum122 Posted September 27, 2015 Share Posted September 27, 2015 Yep, but took 8 weeks. And it's all money up front. Postage was £80, so that brought the total up to £400. Not quite the £320 I said earlier. So there are costs and time issues. My advice would be to order lots of stuff all in one go to reduce shipping costs. Or at leasts, cost of scale... Quote Link to post Share on other sites
Fozzie Posted October 23, 2015 Share Posted October 23, 2015 Im going to be taking my car upto him at some point soon and get some bits made he can do custom coil springs aswell mate for coilovers or just lowering springs he is an engineer so he is capable of quite a bit Did you speak to him again about the panhard rods mate? I'm keen to know more ha Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.