Gary91

It is a shame theres not much older cars going about anymore. All new cars are designed with safety and regulations in mind and this makes them look sh*t. Older cars that were more square shaped look far better than new rounder cars imo. I don't understand why young drivers all want new corsas and such like which they will never actually own because they will be paying it up for years (unless mummy and daddy bought it for them) and either change car before its fully paid or write it off.

After a certain amount of hours of use they should get brighter. Maybe they will turn more yellow then but if they are green, I wouldn't be too keen to drive around with them.

I think 3500k is more yellow.

Gizzmo MS-IBC. Easy to use and can get them new for under £200. Theres one that has a built in turbo timer aswell.

I know a few people that have been to wallace performance and heard alot of good things about them. I will also be going there for a dastek at some point.

Try this http://www.monstermotorsport.com/catalog/index.php/cPath/369_343_359_350

They won't fit because they are the wrong pcd. They are 4x114.3 and you need 4x100

1/8 npt is the correct thread but you will need to choose which size you want the other end to be. best to measure inside of your vacuum hose and get a fitting the next size up so its a tight fit.

This type of fitting http://www.ebay.co.uk/itm/2-x-18npt-FACET-FUEL-PUMP-HOSE-ADAPTOR-FITTINGS-FOR-6mm-HOSE-/110864126010

Yeah its £100 now in scotland, I got 1 last week. For the sake of £30 I would just pay it, its not worth the hassle to save £30.

Yeah just block off the pipes and throw the solenoids in the bin.

I cleaned everything with brake cleaner then painted with hammerite

Oh dear...

http://www.rhdjapan.com/live-sports-front-lip-spoiler-ep82-51010 This is on a mk1 isn't it?

I've heard good things about them ^^^

Only just seen this. Anybody notice something at 8:20 ?

Why bother trying to sell them?

Try this http://www.nomadracing.com/catalog/product_info.php?products_id=486

Sard R2D2. Nice chatter or dump depending on how you let off the throttle.

Yeah it really suits it. Additional selling point

Does the rear bumper have spats moulded into it?

I've used paisley freight a few times and never had any problems

I'm not 100% sure but I think its M12x1.25

I had a similar problem, turned out the points on the dizzy cap were quite worn and my king lead was rotten. I fitted new dizzy cap and rotor, leads and plugs and it ran perfectly after that. In your case I would clean up the points and see if its any better.

As above, any pics of it on the car? Does the backbox come out at an angle?