Jump to content

Gary91

Member
  • Content Count

    153
  • Joined

  • Last visited

Everything posted by Gary91

  1. Brands hatch performance on ebay have various Toyota plugs https://www.ebay.co.uk/sch/i.html?_nkw=Toyota+plug&_trksid=p2334524.m4084.l1313.TR11.TRC1.A0.H0.XToyota+plug.TRS0&sid=shopbhp&isRefine=true
  2. I believe you need to drill out the hole on the roll bar
  3. I thought Tuning Developments or ID-workz would have sold inner cv joints but couldn't find them on their websites so I got 1 from ebay. It come from germany and only took 2 days. https://www.ebay.co.uk/p/0111-001-Febest-Inner-Joint-23x34x23-for-Toyota-43403-12040/1045870958
  4. I believe they are cast differently, the runners appear to be more tubular https://minkara.carview.co.jp/userid/364918/car/269714/6893136/parts.aspx
  5. Gary91

    T-dog

    Bought an item from T-dog. He provided me with a tracking number so I knew when the delivery was coming. When it arrived it was very well packaged and as described. Very happy and would recommend
  6. Also have Goldplug. Its stainless steel with a strong magnet.
  7. The grease looks emulsified so I would say the boot has been split for awhile and waters been in there but that doesn't explain why the shaft came out of the cup. I agree with what maerijn suggested as to why it it happened. Also looks like the drop link is bent. Post up a wanted thread for a driveshaft, someone should have one lying around.
  8. I think its just a mistake in the advert. If it says it fits most toyotas then it should be 1/8npt. If you're still unsure, message them first before buying.
  9. Its 1/8 NPT. This is what I have https://www.ebay.co.uk/itm/MR2-STARLET-SUPRA-TURBO-CELICA-COROLLA-REMOTE-OIL-PRESSURE-GAUGE-ADAPTOR-MLR-JE-/152646259967?hash=item238a6d14ff
  10. http://stores.ebay.co.uk/brandshatchperformance/ There's a selection of plugs and terminals there.
  11. Looks like a mocal thermostat sandwich plate. They have a large flat rubber seal rather than an o-ring. Looks as though it hasn't been tightened enough and oil has got under the seal and forced its way out. I would recommend using either a genuine toyota oil filter or any of these, hks, power enterprise, blitz, greddy.
  12. http://www.ukstarletowners.com/topic/107103-aem-wideband-gauge-black-bezel/
  13. As above, oil filter housing for 4EFTE wanted. Please pm me if you have one. Thanks
  14. No. Theres a guide here http://www.toyotagtturbo.com/forums/showthread.php?80644-what-pipes-are-these
  15. I've never stripped a gearbox but I would say that's right enough. The sleeve must be holding the spring central so it can't move around. I think if the spring wasn't meant to go inside the sleeve, it would just be a solid pin because the hollow end isn't doing anything if its pointing towards the plug.
  16. 1 - Gasket for bottom of cat 7 - injector o-rings 8 - injector seals 9 - camshaft seal Can't think what 2 and 3 are for
  17. http://www.toyotagtturbo.com/forums/showthread.php?71074-EFI-self-diagnosis-system-*
  18. http://www.r-techwelding.co.uk/mig-welder-r-tech-i-mig180/
  19. I've bought 2 carbon fibre bonnets over the years and used Paisley Freight for both. They both turned up undamaged. Just make sure its really well wrapped and insured. You could make a wooden frame/crate to put it in for extra protection and piece of mind.
  20. Agra Engineering, Dundee
  21. Is the template for the inline fuse from the battery?
  22. I would say yes. It looks like the 4 slotted pieces of angle bolt onto the rails then onto your bucket seat.
×
×
  • Create New...