Ollieh17

Have a emanage mapped to 1bar on a td04 with a 3bar map sensor, standard fpr and a walbro fuel pump. On idle the car runs rich, however when i give some throttle it leans out to 15. On boost it drops back down again. But crusing at 11.6. What could cause this? Was fine on standard ecU

If i had that budget id stretch for the wepr gt20 kit

Both, had to walk out bare footed then threw them in the dustbin. Never eaten kfc since, put off physically and emotionally

Looked awesome out on track mate. Dump valve drew in the attention! Which one is it?

Managed to run into the toilet, puked up. Ran out of toilet paper so used my socks. Then sorta ran off lol

Mcdonalds. At kfc and made me throw up in a girls house and had to clean it up with a sock. Never again will i eat it

Mates bought a evo 4 recently! Dont see many around and they are a cool car. Pretty sure he had the only one at japest

Engine bay right by the bulkhead on the passenger side

Bump

I never plan on having the same car twice! So many cool cars out there theres not enought time to own the same one twice

Still having an issue. Car runs fine with the field harness plugged in to the standard ecu aslong as the emanage harness isnt plugged into the emanage ecu. Soon as i plug the e harness into the e ecu the car wont start

Definetly not a ten minute job. Follow this guide http://www.toyotagtturbo.com/forums/showwiki.php?title=How+to+fit+an+aftermarket+manifold+and+port+the+wastegate Id advise porting the wastegate ln the turbo while Its off too

Musta chucked it sorry bud

No switches on the back of the profec spec 2

Ive got the same issue with a profec

Standard ecu seems to fuel td04 spot on at that boost level

I get 11 at 0.7bar

no picture but AEM Guide says mount it 10degrees from horizontal http://www.schnitzracing.com/manuals/AEMWBK.pdf

Paid £100 for mine second hand. Yeh got the bung welded in around 36" from the turbo

I use AEM, had no issues

0.7 on mine with standard ecu. Fuels spot on on the wideband. Obviously theres differences between cars though

i had a shagged shop special plug and play that i had to smash the chip on to get my refund. I can see if i still have the rest of the board?

The one bought for £450 is still on here. Different one

Was this the one up on facebook and ebay he kept dropping the price on?

Item For Sale:BMW Bottle Cap wheels with 4 good tyres(two matching two odd) Tyres 2 x 195x60x14 2x 185x60x14 Item Condition & Description: Not bad condition. No curb marks on the wheels, just a small bit of paint has peeled off. Front tyres have loads of tread left 4mm plus. Rears slightly less but good for a while on the rear. I have never seen these wheels on a Starlet before, and for German wheels suited it to the ground. Had alot of comments about how well they suited the car!! Price: £120 collected from Gloucester. or arrange own courier and cover costs. Im open to off