morgey

Lot of kit and look like buddy club rims aswel! Good couple hundred quid n u got a road worth V for 2k i recon!

Yea definitely and the driver side has the hole for the hook if it does. They can still be purchased off ebay i think ;)

I've got a full set of them in my starlet and a pair of fronts in my corolla Fitment of oem mats are spot on and the tunnel mats just a bonus! Glws matt!

U sure these arent for an n/a i had a 4 line kit that wouldnt fit my gt rear beam?

Dont they say spray some brake cleaner on and around pipes n fittings and when you hear a change of engine note thats where the leak is??

http://www.ebay.co.u...=item2577fca012 a bit on the expensive side but a good example minus the faded decals.

Bumpy

thats stuff on my list, i cant remember the last time i actually got something off of it tho :'(

ill be at work for half the day then drunk the other half. so hopefully it happens later on during the day lol

i could do with alot a workshop would be ace, failing that someone very kind to change a 2nd gear syncro, some flocked interior parts. cams, ecu. mapping lol

Update time!! well the brakes where a bit of a chore due to my old heat/dust shields being rusted to hell and back so drilling the bolts out and cutting it up was the old option. old rusty! then i wasnt happy with the distance between the disc and the hub, this is probably due to the custom work I've done to the hubs for the different stub axles, so i attacked them with a grinder to give me a smidge more room. like so how it was after the hubs got munched Much better Soo Brakes are on and bled through with Motul RPF 600 and being bedded in, pedal feel is epic compared to before so

Get a garage to print out a reciept saying its had a rebore and new o/s pistons and its more like a 2040cc ;) Oh and both my old mans 2.3 volvos are 2316cc iirc

This is more a gauging interest as our ep's dont run electric speedo's but might be of interest to someone looking to fit a different clock setup?? Item For Sale: electronic speedo drive Item Condition & Description: visually ok, no damage just a little grubby. Was removed from my levin 5spd gearbox (C series box) which i was told had been sitting indoors for 2 years, so i cannot guarantee that it actually works or not. If someone can recommend a way to test it i will happily try it out. Price: £20 posted? Not sure offers?? Pictures: Payment & Shipping Details: pa

I just use autogylm ultra deep shine and extra gloss protection comes up ace on my SR Did have it mopped with g3 or something along that line and my mint but for day to day the above is fine This is autoglym shampoo, meguires ultimate polish with Auto glym extra gloss protection, nothing else. No camera tricks either. Was about 11 months earlier it was mopped and its still fairly swirl free

Black with purple blitz writing ;)

For some thing i can understand but for modding a car then no, get a credit card and do it that way. But personally for me if the cash aint in my bank i dont buy it. Does take longer to get what you want but i garrentee if you really want it, it will take longer to pay back a loan/credit card than it would to save up for something you really badly wanted

Welcome along, nice little sleeper you got there ;) Whats the spec on your other starlet?

Fresh pic up in early post again!

Glad your enjoying it still i know exactly how you feel There used to be a guide somewhere to a near 200hp setup but havnt seen it in a while. Im sure someone can point you in the right direction though

I dont have them but you will need the manual flywheel bolts as they are longer than the auto bolts. Not sure if you knew that?

Yea they can skim the mating face and they can also create a small step away/down only like 0.3mm on the outer edge where the clutch pressure plate mates up. This is what i had done to my old one and it slightly increases the pressure of the standard clutch. Bit more of a bite and solid feel on the clutch. I guess this would decrease the life of the pressure plate but i doubt its much to worry about. I you can have material removed from the back of it but without knowing what can be done or having it balanced i wouldnt recommend this

I've never bothered loctiting my clutch or flywheel before, not saying its not worth doing and more so if you're running big power but aslong as its torqued down properly it shouldnt be that important. But you only need 1 or 2 drops normally if you do. Regarding the flywheel aslong as its a engine builder they should know how much material they can safely take off

Been being lazy its about 2.5 hours and will cost me like £40 in fuel :/ shame u didnt do this earlier in the year n cuda swung by after pod or something

Checked your coolant levels?

that saying that every time i started my car would do my head in lol