andy91145

I would be interested for sure Great idea, hopefully something is arranged

Thank you both, appreciate it

I made a little video more for me so I don't forget my first Jap fest experience. Very much a novice when it comes to recording and editing :'). Managed to get a fair few Starlets in. >http://youtu.be/XiCTXEouIvc

Where abouts have you found bearings for £12?

Good communication and the packaging was incredible, wouldn't think twice about buying from him again Cheers

Would like to thank the mods great stand, my first UKSO event and worth the long drive and no sleep :'). Got a lot of ideas for my car now so looking forward to 2015 now .

Yeah I am that guy, thanks again for doing that

Both wheel bearings have been done, they are both fine

I have a knocking noise sounds a bit like a train from anything over 15mph and doesn't really go just gets faster. This happens all the time going straight, corners with the car rolling in neutral the lot. Swapped the driveshafts out on both sides and swapped the gearbox oil and it's got a bit quieter but hasn't gone. I'm thinking maybe diff bearing?

As the title says, must be working order with no damaged cv joints

No I ripped the AC out the day after I got the car will remove it all Thank you all for your help!

Weight saving haha every little helps! I haven't tried blocking it off hopefully it won't start running like shit again!

Also arrowed where the pipe goes at either end

Erm no it's not :') it's the tiny little pipe I will put circles on the pictures

I have been using the HDi boost gauge a while now and it's a good bit of kit. As for the boost controller I have one similar from the same seller. Was very easy to install and works well enough for the price.

Just wondering what this is for goes to the carbon cannister I think but it affects my idle. With it fastened on the car idles at about 450rpm with it off it idles perfectly at 800rpm. Just wondering if I will be okay to leave this off? just if it's not clear I'm pointing to it with the ratchet extension

I have a Jperformance, it's a pretty big core and works well just a bit of a nightmare trying to mount it

Sounds nice I will have a fiddle about haven't got much hope though!

Still not sorted done it the proper way and it still doing the same, surely the wastegate shouldn't be open at 4psi then get louder when it suddenly jumps to 9psi? Really starting to annoy me now!

Oh well I will update tomorrow hopefully it will be fixed . Thank you for your help!

Sweet any ideas where I can run the green line to or can I just block it off? Thats the line people use for bov's isn't it? HDi something something :') Have there boost gauge considering the prices it seems very good quality!

So basically just get rid of the green on and T the pink the the bottom port at well yes? Cheers for your help, I'm to all this boost wizardry

.

Running external wastegate 8psi spring in and now a ebc. When the top wg port was open couldn't boost past 5psi was told to get a ebc as it will help now it boost to 5psi till about 4k rpm then it will go up to 9psi thats with the ebc turned to the max. On the video you can hear the wastegate open at 4 then it sounds like Vtec it crosses over to 9psi. I want to running around a bar but I can't get anywhere near that. Watch the standard boost gauge jump as well. These are is how the instruction said to set it up with an ewg This T is from the bottom of the intake then to the boost gauge and to the boost controller

May be a stupid question but where is the map sensor? Yeah I've got that pipe on I haven't opened it the spring was in from new