Jump to content

Glanzacoley

Member
 View Profile  See their activity

  • Content Count

    549

  • Joined

  • Last visited

 Content Type 

Everything posted by Glanzacoley

  1. Glanzacoley
    Still available??
  2. Glanzacoley
    Still available??
  3. Glanzacoley
    I remember buying a set off you for £60 haha
  4. Glanzacoley
    Bump???
  5. Glanzacoley
    How many discs can it take mate?
  6. Glanzacoley
    Are the footwell light & ignition lights still available?
  7. Glanzacoley
    How much posted mate?
  8. Glanzacoley
    Any tips on how to install one guys?
  9. Glanzacoley
    As above please
  10. Glanzacoley
    I'll leave it then mate haha 👍👍👍
  11. Glanzacoley
    Pm sent mate Pm sent mate
  12. Glanzacoley
    I've taken all the bolts that seem to be holding it on & it doesn't want to come off. Do i also have to undo all the bolts around the pressure plate/flange?
  13. Glanzacoley
    Anyone got a guide on how to do this?
  14. Glanzacoley
    Can anyone tell me which pipe I have to run the boost line too? I have a greedy dump valve do I put the boost line to the pipe on the top of that? It then feeds back to the inlet manifold?
  15. Glanzacoley
    I've got a fmic just need the pipes anyone got any?
  16. Glanzacoley
    I've just done a compression test I didn't open throttle body I just turned it over I reading were 98,138,150,90 I know there shouldn't be more than a 15psi drop between each cylinder & that it should be around 170marl considering how old these engine are. Should I re do it with throttle body open?? Should all four plugs be out at one aswell?
  17. Glanzacoley
    If inter cooler isn't connected it won't give a lower reading will it?
  18. Glanzacoley
    Ct9 manifold sold to me too
  19. Glanzacoley
    As above please don't mind if it's cracked or been welded
  20. Glanzacoley
    Sorry I didn't take bearings mate I bought a brand new see for £50 posted
  21. Glanzacoley
    Wanted please guys
  22. Glanzacoley
    The bit that connects slam panel to the chassis to strengthen it :)it bolts to the lock to stop it bulging when you close the bonnet haha don't know what it's called
  23. Glanzacoley
    As above
  24. Glanzacoley
    Cheers guys with regards to taking the fcd off do I just cut the wires or? This forum is actually better than Facebook haha:)
  25. Glanzacoley
    But starlets are common for spinning bearings I've been told a 4efte that revs crazy Could be bad?
×
×
  • Create New...