wakeabby14

Have been seeing a few of you round beverley/hull area! Im in a Silver 96 glanza will see me down beverley bypass daily and around kingswood area!

Im in need of an Electronic boost controller GFB/HKS ect... Would like it with all the wiring and solenoid if possible. Let me know what you have Thanks josh

AC is removed so that is not an issue! will take it easy with studs if one came off that would be a nightmare! what did you warm them with a blow torch? or let it run a little before you took off the mani?

Thanks a lot mate great help!

Thank guys will get on it tomorrow if i have time nice one!

How much of a job is removing the stock manifold? I have a new manifold i need to install however i have heard its a bit of a pain to remove it any tip or pointers? Thanks josh

You selling that flare ;) ?

Welcome to the club! however this is in the wrong section, Re-post it in the engines section and you will get more help there. Thanks josh

You selling those drive shafts?

So i have just recently purchased a set of MOMAN dials off ebay, i am comfortable getting the dial cluster ready for the install but im very inexperienced at wiring/electrical work. Are these straight forward to fit or can they be tricky? any information on this would be helpful If anyone knows someone in the Hull/beverley area than can help that would be much appreciated. Thanks josh. Here is a link to the dials to give you an idea: http://www.ebay.co.uk/itm/TOYOTA-STARLET-GLANZA-glow-gauges-plasma-dials-tacho-cluster-plates-indiglo-set-/252103351327?hash=item3ab287dc1f:g:HH0AAOSwPcVV1zDO

Are these coilovers stiff?

It does it all the time nothing causes it to happen, where could the bad earth be? or shall i just make a new earth.

So at the moment most of my interior lights are flickering (Main clocks speedo/revs/fuel ect, my main console lights showing the blowers for the windscreen and also my side lights on my headlights they are really starting to piss me off. (THE MAIN HEAD LIGHTS ARE NOT AFFECTED JUST ALL THE LITTLE STUFF) any of you guys have an idea why this is happening it has done it since i have had the car? Could it be a bad earth? A Trouble with a fuse? Bad wiring? Please help me thanks josh

Im not a 100% sure, Im not really much of a mechanic i just try and do the little things i can and get the rest done at a friends garage. I will have to ask him about it as i just want to be able to drive my car and enjoy thrashing it now and again but i cant due to the suspension. My tyres are the standard size and nothing has been changed, I just wish i knew more about cars and had someone to help me learn locally but i dont so its not the cheapest taking it to a garage everytime to get things sorted.

So im getting pretty sick of my current suspension issue, I cannot drive down a country road faster than 40mph with out going over a slight bump and my tyres hit the wheel arches, The car has been lowered by 40mm by the past owner, I am looking at changing the springs alone and not the coilovers as i dont have much money, What are the best and stiffest spring at normal/lowered ride height. (bare in mind i was the only person in the car at the time and no items in the boot apart from my spare tyre)

ok i will order one, there 9mm filters arnt they?

Ok thanks man i really appreciate the help from everyone im new to this and learning all these new things a long the way , I just hope i dont make a mistake one day that i regret haha, thanks for taking time out your day guys for helping a novice

DO i still need the filter even though the catch can is now going to atmosphere?

OK this is the before photo with both pipes blocked as you can see and also the pipe blocked going to the FMIC And this is the after photo with the vacuum line blocked and the FMIC blocked but the breather going to the catch can then the other pipe is going under the car and going to atmosphere. I think i have fixed the issue would you say that was my problem and now should be resolved? Thanks josh

Ok so i have just been outside and installed the catch can again, i will show you the set up now and you should be able to tell me if that is what was causing the issue i was having. I will post a before and after photo what it looked like 30 mins ago and what it looks like now.

I post a picture now i think i know where i have fucked up, im new to this guys im sorry

you know the nozzle on the crankcase that would go to a catch can that is blocked, i think i have figured it out i need to set my catch can up and the second line thats on the catch can direct it to the atmosphere as i have made a novice mistake and blocked that breather line.

Ok so here is the run down... So a month ago i attempted to install an oil catch can and i did successfully do everything correct by looking at stuff on this forum about it, You will see where im going in a second.... So in the morning after i installed it on idle when i started it massive clouds of gray/white/cream coloured smoke was coming out of the exhaust and i had to put it back to stock again as i did not want to cause any engine damage and i have done nothing with it again since... How ever today i have just done a BOV delete and blocked the vacuum line, line going to intake and also one going to the crank case sounds great no problems all those sexy turbo flutter noises, took it for a test drive was fine came home had a 15 min break then needed to pop to the shop, driving fine then all of a sudden going at 50mph at around 3000RPM the white/cream/grey smoke appears again and there was loads of it! i had to pull over wait 5 mins with the engine off then start her up again and drove home luckily i was only 3 mins away from home. What is causing this smoking issue? is it that my crankcase is not breathing correctly as the line was block and do i need to get a mini crankcase filter and it will fix the issue? or do you guys have any other ideas. Im new the the modding scene and i dont really know what im doing fully and would like some help. Please help me quick if possible have work monday and if not fixed by then will have to go back to stock bits again. Thanks josh Current mods... Decat FMIC HT leads and other bits not that relevant.

Thanks mate

Relating back to the steering boss kit i used it was the wrong one so please dont order that one, if one of the moderators can remove the link in that post that would be great dont want to guys to buy one and it wont fit thanks josh!