wakeabby14

Much appreciated lads! glad you enjoyed the read up! next car im getting is an M4 as can daily and have the power if i fancy it. ill still hover on the forums reading builds as i love it too so keep them updated!

Car sold unfortunately! end of my build, Been a fun journey in the starlet scene but onto bigger things. Starlets will always have a big place in my heart and probably wont be my last one. Until then peace out.

cheers mate appreciate it

I have removed the listing currently, going to enjoy it this summer but i do see it getting sold at some point in the future. since buying a house its harder owning 2 cars plus i live alone so its a stretch. time will tell

Just a quick one sam the 4e,5e and 4efte cams are all the same. Only the 5efhe intake cam has a 1mm higher lift.

Small update: Fitted my new blanked off bonnet scoop to prevent any water going on my coilpacks and salt/crap going in the engine bay. Fitted front and rear seat belts so now interior is pretty much all done, Can actually drive it legally now! haha I also bled my brakes again as they got air in the system with a previous issue which is now fully resolved. Next plans... 1) remove dash tidy all wiring and create custom looms for gauge clusters and control switches 2) retrofit back in the 98 spec climate control blower motor box+controls so i can finally have heating and screen d

Quick update: Managed to get some jobs done over the weekend, Sanded back my arches to bare metal and got rid of all surface rust after my wheel clearance took all the paint off. They are now treated 3 coats of red oxide, 3 coats of primer, 2 coats of colour 2 coats of clear. Unfortunately I got over spray on my 1/4 panels so will have to get it off with compound should have masked it better haha. Finally after removing the carpet 6 months ago the interior is all back in and looking fresh! so much better without the cage its a much nicer driving environment to be in. Next steps is t

Nice dude let me know how you get on, If your going big power make sure you get your inlet manifold ported or getting a racespec inlet mani. They tend to max out at around 370ish bhp and become quite restrictive. I wish we had corn fuel over here!

Cheers dude! Ill keep them up to date as best i can, will help with a vehicle sale if i ever sell it as they can see all the money thats been put in :'D not that i will LOL Cheers joey lad we will both be ripping around really soon!

1.8bar at 3900 rpm super quick. im using 5EFHE cams the intake cam has 1mm more lift over 4e/4efte cams

Thanks a lot sam! the torque curve is fantastic car just pulls to redline its rather scary!

Cheeky bit of launch control 😛 video-1623676270.mp4 video-1623679057.mp4 video-1623679065.mp4

UPDATE: Not updated this in quite a while, Loads of work has been going on with the car though since the last update. Its hard to stay motivated updating this when not many people use the forums anymore. Anyway moving on... Dyno day finally happened, The car made some good power as you can see in the graph below. Wasnt all fun and games on the day, fuel pump started failing on higher boost runs so that got swapped with a walbro 350lph, half way through the run a sensor came loose in the thermostat housing and dumped all the coolant over the dyno. The car also experienced some overheati

Drill them out dude, will help with breathing of crank case pressure. Its easy enough to clean a rocker cover just jet wash it.

thanks mate! ill be mainly street driving and 1/4 miles if i go to a strip as a rare occasion

Sound good sam! hit me up your details in PM im going to need an option i dont see this box lasting long> Cheers

Update: So the build now is coming to an end I've finished all the jobs on my list now! I've been doing jobs non stop for 14 months now and I've finally come to the final step which is mapping... When your building these type of projects you will come across many issues, You will feel sad, annoyed, angry, frustrated you may even cry i did a few times! However never give up as when it comes to the end and your enjoyment starts coming into it, You will look back and think everything you have gone though has been worth it! Thanks for all the lads that gave me a hand on little jo

Thanks a lot mate! it will be a handfull just hope it all goes well on the dyno!

Update: Car is booked in for mapping on the 28th at racecal, fixed almost everything now so expect dyno figures soon! The idea of a quaife dogbox keeps popping into my head, spoke with the lads at quaife and they say with my type of use i can get away with servicing the box 1 per year rather than every 24 hours worth of racing on track as intended with race teams. Bill would be around £6800 all in its a whole lot of money! to be continued....

Let me know how you get on with the gearbox options mate, i need a box that can cope with 400bhp without buying a dogbox

Another update: Got the following jobs done since my last one... 1) New handbrake cables 2) Wired in Horn 3) Wired in rear fog lights 4) Secured the CV boots 5) Wired in rear number plate lights 6) Wired in reverse lights 7) Secured radiator better .8) replaced drivers side brake line as started rubbing. To do next: I need to sort an oil leak out, its either timing side crank seal or oil pump its dripping quite badly. I also have a leak from the gearbox side could be crank seal but i think its sump as didnt leak before i removed the sump. Apart from that

Thanks a lot Matt! will have to pop over and see you one time and you show me yours been egar to see it for years now!

Thanks mate will do! Thanks appreciate it! Wont need luck as everything will be ready for it, just need the special tester for emissions haha

Update! Not updated the thread for a while been quite poorly and in and out of hospital but im on the mend now so been cracking on with jobs and a lot has been done! Car is now running and driving MOT is booked for next week so can start driving it around loads once its legal again. Jobs that have been completed since last update: 1) All timing sorted and engine put back together 2) Exhaust fitted and Vbanded at bottom of decat for easier removal 3) Air filter setup fitted 4) Extended wheel studs cut down and spacers removed for better wheel clearance 5) Wired in AEM Oil pr

Big fucking wound... you have been in the scene so long too. Hope you made the right choice!