Socks

There only a touch smaller then a TD04 on the cold side... TD04 at 1.0 bar do about 220bhp with good settings. Id guess 200-210bhp at the same boost Go look at the power leaderboard if you need any more figures!

Ok! Actuator is easy to setup. You want to set it so its not so loose it vibrates and doesn't close the wastegate port. But not so much tension it'll overboost. Generally. It was to be just enough tension to hold the port shut... Then the boost controller increases from there.. Increase the Duty Cycle 5% at a time, doing 3rd or 4th gear pulls. Until you hit your desired boost level (or fuel cut, then back it down until it doesn't hit fuel cut at all) Once that's done. Increase the GAIN. 5% at a time, until the boost doesn't spool any faster... The Gain should never be higher % then the duty... Simple Really

The NA Map Sensor is NOT the same as the turbo versions...

Seats are actually MINT when I saw them at the weekend Dale! Brucey Bonus!

195/50/15 Tyres at 7250rpm Limiter... C52 (GT Box): 1st: 38mph 2nd: 63mph 3rd: 92mph 4th: 124mph 5th: 148mph C160 (AE111): 1st: 38mph 2nd: 59mph 3rd: 81mph 4th: 103mph 5th: 132mph 6th: 166mph At 70mph C52 is 3600rpm and the C160 is 3100rpm But I don't know of anyone that's run big power thru one?

2.8 bar map sensor (1.8bar of boost) is what I used... However, the other option is the GM Sensor... http://www.ebay.co.uk/itm/Genuine-Proper-GM-3-Bar-Map-Boost-Sensor-Wiring-Plug-Apexi-Power-FC-Motec-/131232497406?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1e8e10fefe I very nearly used one of those... Tried and Tested to work with the PFC... Altho saying that if your on PFC, you'll hit the limit of the ignition system at 1.7-1.8bar anyway... If your on a fairly large bine...

Get what you pay for... EMB is only really just good enough imo... Only very basic adjustability!

Been there done that got t-shirt. Loctite fixed the issue.. Allow it to dry tho!

The Bigger the Mapping Table. The more Values that can be added... Smoother more precise fueling... Also good if you decide to go for more power or change your setup in the future! I went over 340bhp with one of these!

E-Manages cane fit behind the glovebox, if you have skills.. I say emanage ultimate. launch control, better mapping tables....

Gonna be a weapon buddy! Keep us posted!

see you at 2pm! Ill be in the corolla tho!

It runs to 7500rpm Colin...

I run a full 3" Race-Tech System bud!

Boing!

Boing!

Boing!

Boing!

I do think that this country has enough problems that need sorting first... Before going out our way to try and help another country... However, I don't think war is the answer to anything... Signed...

Ill be there watching! U gonna win again Mike

That is going to look quite smart Miss Collis. I have to say! There gonna proper suit it! Have you thought about painted the tops of the door frames black, to blend in with the windows and window borders... Like on the Imported Starlets. Would look really smart of this tbh! See Pic

Looking GOod! Get them on the car!

Im near Lincoln... About 2hours 30mins from you bud!

Item For Sale: Evo 4 Recaro Seats w/EP82 Rails Item Condition & Description: Seats are in good condition considering there age. Some small wear on drivers seat obv from people getting in and out... On some homemade EP82 rails. Drivers sides, passenger does. Price: £250 Collected? Pictures: Payment & Shipping Details: Cash or Paypal Collection!

Yes Mate! The ECU will need mapping though!