Jump to content

fiddlersport

Member
  • Posts

    1345
  • Joined

  • Last visited

Everything posted by fiddlersport

  1. what you have for ep82 ?
  2. not seen one of these up for sale for a long time !!! Good luck with your search
  3. true say, did the same thing on my mx5
  4. I just finished stripping a ep82, complete strip down and there alot of places for water to get into ! old seals,bungs.. i think they get hard over time and split or crack and then the flood starts
  5. i seen this car on the road but cannot remember... nice to see a ep restored then in the breaker section, good luck with the build !
  6. good job, commonly happens when people wash the engine bay but usually the rota arm and dizzy cap hardly been change in its life so its a must (to change it) if of owning a gt/glanza
  7. changed my standard to a rolla mani and it did the same, the tps was different so i changed the tps and all sorted, could be your issue maybe ?
  8. My ep has lacquer peel atleast its not rust !!!
  9. a few GTs on ebay
  10. pmd
  11. cylinder leak down test if you or your mate has one ? agree with Stu... head off and just pull the piston out, most likely if it is bad then it will fall apart in your hand when pulled out, happened to my mates ep
  12. for the time and effort and costs, stick a 4efte in , been down that road and its all fun in the beginning but in the end the boost is the best bang for buck !
  13. i would be easier to source another n/a and takes its ecu, the black box under dash and the keyring-around the key barrel maybe
  14. you lost me on the second sentance Stu... when you coming to england for a short term holiday you can try install it on mine lol just about managed to wire up the 5efhe in me n/a and after that i wouldnt want a long wiring job again for a long while lol
  15. first rule of thumb when buying a lsd box, look through the shafts and hopefully that bar wont be there if you catch my drift !
  16. thanks shaun for the good advice
  17. i was thinking it would be more accurate and can be fine tuned rather then the stock trigger which is in the dizzy on the head just like most new cars, cam sensor, crank sensor
  18. seen a few members run the coil on plug set up is it worth it and is the tooth and trigger required on the main crankshaft pulley or do peops use the sprocket with the earlier oil pump ?
  19. Hi thanks for the info.
  20. just as ben said, get one done up already or a bit lower priced and you do the mods
×
×
  • Create New...