lukEp

You can clearly see the size difference it's not a little difference it's a lot

No problem just like to see them going to a good home great idea on the tuning development decals on the bonnet bulge

welcome along good luck hunting

Ryan let me know if you want some before hand I can sort you out I trust you. The last I remember geo said his sticker stock got wet and ruined. Not 100% but pretty sure he will clear it up.

thats all i've got

started adding videos at the top^^^

pm idrees he meantioned someone he was going to use at the rolling road meet

X2 I check my turbo once a week for play blade damage and I run pure chatter no bov no recirc valve everything blocked off and it's been fine so far.

Craig_n got most with 87.8 then close next was 87.6

fantastic!

David ashton: Rob Bower: Matts (socks) Mine craigs videos of a few people are still uploading and lukerobz took most of the pictures

I'll upload my pictures and videos tomorrow

260mile and still have just over quarter of a tank left lol and please dont tell me jo head gasket has blow between two cylinders after having her head gasket done????

no way matt my aircon stays! I'm going to find an alterative to removing the aircon and have a good air flow too. watch this space!

Really good day guys going to sort my intake restriction and exhaust restriction out maybe adjust the timing and then I'll be ready to find my missing 40 ponys

Found it slot easier to go from under the car and found that with the aircon still on it's fecking hard to change the oil filter unless you remove the power steering pump.

^^ x2 the interwarmers are shite and hotter intake temp give more chance of detonation plus you then get to paint your rocker and bling the engine bay up

Just finished cleaning the car so hopefully there won't be to many flys hitting the front on the way down

I'd say it will be fine dan you didn't overhead at all so with it just being a faulty headgasket I'd just replace it and be done with it plus dont forget tigthen them all loosen then tighten again acording to the book the head bolts arn't strech bolts so can be used again to!

I never got any grease with mine so I just used normal stuff!

Say he lives in Dublin Steve. How the fuck do u know that?

It's all about timing!

I think you could do with a new rad cap mate couple of quid.

well small update: Took the wife to hollinworth lake few weeks back and as i went over the brow of a hill onto some rail tracks didn't see there was a concreat slab missing from inbetwwen the tracks and WACK smacked all under the front of the car Oh well shit happens had a quick look nothing leaking out so just carried on....... well yesterday had it over the pit to see V in the bottom of my intercooler both pipes from intercooler are flat and the exhaust at the front is flat but everything still works so it can stay like that for now. and ported and polished my exhaust mani some more for sat's RR meet and fitted decat removed/sold my hdi ebc-r and adjusted hks actuator to .8bar I can feel the difference of the decat plus its alot louder to, think porting the mani again helped to. fitted all 4 new toyos as well on monday as they were a bit low and with rr coming up thought better get it sorted. tomoz will have full service and boost set to 1bar and friday is clean the car day what time you coming round craig?