LukeH

ah, nice! could probably use the backbox without problems. is the system from a 91 or 82? if its an 82 the hangers will need modifying to fit.

Im looking for a new exauhst too as mines blowin like a hoe. in theory i dont see why the back box and senter section from the japspeed system wont fit. but becasue its made for turbo application the inside diameter of the pipe will be too large and wont provide enough back pressure. so you'll probably see a loss in performance. go custom. ive been getting quotes of around 250 for 2" cat back with 3" angled back box.

Nice result dude what are you aiming for with the new turbo ?

thanks for the offer dude but i cant, problems becasue of the coilover was pinching on it, and thats all siezed up, so she's on axle stands cheers tho

Sorry guys, dont think i can make it to this one. My c.v. boot's decided to split and take a piss everywhere

im sure hes a sound guy and all, but i did have some problems previously with a part from him. got the item in the end, but it took a while. :/

Id be intrested in this at some point in the future, do you think it will also fit a ep91?

what like you ? ^

When this happened to my mates beamer, he drilled out the bolt, then tapped a thread and used a helicoil to get the thread back to the headbolts correct size. Its not really ideal tbf, last resort.

Bump, who else up for this? and anyone up for meeting at junction 33 asda again? ( :

just looked through the web and apparently you can get them from any seat dealer for £19 ? Part no - 1ML 805903

Dunno if this will help as i can see this picture you posted becasue im at work but: http://www.ukstarletclub.com/forums/index.php?showtopic=1179 hope this helps

if you want to strip the wries from the airbags, aircon, power steering, then maybe try and source were the cables originate in the fuse box or something? failing that could you connect all the loom to the engine and what ever you have left unconnected, unroute through the loom?

shocking ha being serious, thats a verry reasonable email. the fact is that its damn right dangerous to be able to get a shock from HT leads. they should replace the leads i would have thought

What tyre's are you using? also how are the tyres wearing? on one side or evenly?

Hi guy's, Im a bit stuck as to what path to go down in getting a uprated exhaust. so far ive been looking at getting a 5e OBX mani and cat pipe, then getting 2" custom system from that. But i read somewere that there isnt much if any gain from the obx mani. does anyone know what o/d the 4-2-1 mani from the gen 1 corrolla is? and if it can provide a better gain than the obx? my exhaust is pretty much falling apart so i need a new system anyway so the fact that the obx wont fit the rest of the system isnt a problem. thanks in advance

Pm'd

sweet! im in 1) ryan lang 2) Amjad 3) ollie ryan 4) jade_star 5) Sparky (even if my car has to be towed ) 6) ryan33hks (will be there on time) 7) Enots LukeH

signed.

http://ep-tune.com/?q=node/89

yea man, would bee good to make it sort of a regular thing, despite me being over the stream it didnt take me long to get there and back. look forward to the next one.

In my N/A the speedo claimed 122/3 mph, off the clcok down a hill with back wind. was a verry long private runway.

Sounds like a wheel bearing to me. can you feel any play i the wheel at all?

Ha, yea need to see the pic's! was an ace drive lads, was good to meet you all.

aye, wethers looking sweet PM'd enots and ryan my number, just in case.