Jump to content

1990timeismoney

Club Member
 View Profile  See their activity

  • Content Count

    753

  • Joined

  • Last visited

 Content Type 

Everything posted by 1990timeismoney

  1. 1990timeismoney
    Has the turbo been rebuilt and does it smoke just on idle or as you let of boost
  2. 1990timeismoney
    I got the under seat storage tray but no rails Think I mite have a clean box in garage to will have a look for you
  3. 1990timeismoney
    Haven't really had time to check but put key in ignition after work and all lighted up so guessing a bad earth and battery is flat I only Brought a new battery a month ago so going to look for a bad earth. I still ordered a new set of fuses for the motor just in case
  4. 1990timeismoney
    I can only find a 60 amp fuse in the bay the same as your link the tgtt wire diagram only shows 60 amps to from what I can see
  5. 1990timeismoney
    Cheers for the replys guys where is the 80 amp located and can these be picked up from halfords
  6. 1990timeismoney
    Hi all drove car last night fine went to start it this morning as soon as I turned the key the electrics went.now nothing comes on when I turn the key. Any help much appreciated.
  7. 1990timeismoney
    either are excellent quality go for the top mounted kit
  8. 1990timeismoney
    Ttt does anyone know where can be sourced in japan
  9. 1990timeismoney
    Morning bump
  10. 1990timeismoney
    Do you no anyone with a spare gauge you can wire up
  11. 1990timeismoney
    I'm running a aem wideband 2.1 bar Is below stock pressure I think stock is 2.4 im running same setup at 1bar with fuel pressure at 2.5 to 2.6 and getting 14.7 idle and 10.9 to 11.1 wot
  12. 1990timeismoney
    Sounds strange what fuel pressure is it set to.i had a similar problem with myn
  13. 1990timeismoney
    Has it got a fcd fitted. Or has it got a rrfpr
  14. 1990timeismoney
    Afternoon bump will pay good money if one is available
  15. 1990timeismoney
    Bump
  16. 1990timeismoney
    Bump still looking to buy
  17. 1990timeismoney
    What fuel pressure is it running I thought the jam ecu could run fine on standard regulator and injectors
  18. 1990timeismoney
    Pmd
  19. 1990timeismoney
    I had a code 52 before and was the wire connection had you put a meter on it to check current or is it continuity
  20. 1990timeismoney
    Should be fine by the looks of the code. What do the error codes you get stand for
  21. 1990timeismoney
    Hi looking for some info on the above about the rolling road and anyone take a starlet there for a map etc
  22. 1990timeismoney
    I'm not sure if it ran fine it must be something else have you ran it in the car your putting it in before
  23. 1990timeismoney
    MK2 and mk3 ecu pinout is the same and code is 10100. The mk1 1991 is 10040 and will need two wires swapped to run in a MK2 or mk3
  24. 1990timeismoney
    That's a pre 1991 ecu by what I remember and won't work in the MK2 others will be able to confirm
  25. 1990timeismoney
    Ah i see same ecu i didn't read it properly im not sure then what's the code on your standard ecu
×
×
  • Create New...