Mo3

haha yes about time this will be awesome! hope they call us at austarletclub for a meet or something

haha ye bit worried becasue theres no rubber on one pulley and vibration could do something bad :/ na not CJ, did a group buy on austarletclub got them custom made good buy haha ye i wanted one then thought its to much money for a piece of plastic...shipping is alot of money from uk to aus turbo slapped on now facing actutaor mounting problems

small teaser of whats to come...

i also like his youtube videos

hollly shit fuck your turbo has a engine attached to it

Hey guys building a forged 4efte engine and will be putting it into my ep91 (glanza replica) I striped the wiring and ep82 ECU from another ep91 that i got the engine from and that wiring was joined up with GT wiring It took a while to take it out and god knows what problems i will have when installing it i bought a emange blue with ignition and injector harness My question is will i be able to wire the emange blue into my ep91 nonturbo ecu and get it turned and still have it performing at the same rate as if i where to wire it up to a ep82 ecu? My friend compared the two ecu's and the ep91 obviously does not have the boost port and the knock sensor Will it damage my engine if the knock sensor is not there? what does the boost signal do other then send the signal to the cluster? Also i know the ecu's both have the same plugs as it shows here: />http://www.toyotagtturbo.com/forums/showthread.php?20491-EP82-EP91-ECU-Pinout-Diagram so would i be able to just plug the ep82 ecu in and get the wiring from my ep82/ep91 that i striped out and splice it to much the wiring in the ep91 to make the ep82 fit properly? bit confusing but any help appreciated lol.

you need to wife her asap

lol ok thanks bro

easy, take it off and put a tf035 off a Subaru gt Forrester 98 on it, same flange bolts straight on starts boosting at 1500rpm

seems legit

hmm i did it today... did exhaust brown and intake silver

gun metal looks the best

thank you my friend he was very pleased by the way

hey guys sup miib my mate is wondering what colour will look best for his next project and wants electric green and corolla gun metal grey much thanks in advance dude

nzl

thanks for helping out guys nearly there! ye i got them as well, did not add to pic and will be using cometic 1.4mm heaed gasket instead of OEM one

dam..i should really wash my car..

hey guys my overhaul kit came today from speedvision for my rebuild..box came open i dont know if part's are missing also i dont know what some of these parts are if anybody could name some..also would be good for future reference for people (1 and 19 are the same) 1. Stem oil seals 2. N/a mani to exhaust section gasket / ring 3. Rocker cover washers for on top 4. Rubbers for the injectors, you get one below and on top per injector 5. Injector o rings, you got an extra one 6. Crush washers for fuel line banjo 7. 8. Exhaust gasket for n/a 9. 10. 11. 12.dizzy cap ring seals - one possibly for the water pump pipe at the back that has a ring on it about that size so the other larger rubber may be for the dizzy as i dont know what size the second one is. 13. dizzy cap ring seals - one possibly for the water pump pipe at the back that has a ring on it about that size so the other larger rubber may be for the dizzy as i dont know what size the second one is. 14.Oil pickup to block seal?? 15. oil pump ring. 16. Bottom timing belt cover seal 17.inlet gasket 18.manifold gasket 19. Valve stem seals, exhaust and intake are different 20.spark plug seals 21 Intake cam seal belt end 22.cambelt side crank seal 23.clutch side crank seal 24.rocker cover gasket 25.head gasket 26.timing belt cover seal(upper)

TROLOLOL

just paint it purple

wait are use sure use need a FPR with emb? cant the emb adjust the fueling by 20-25% or something?

+1

hmm to invest in a paintball gun :/

bat shit is the worst..stuffs your paint up hard