Jump to content

garrygt

Member
 View Profile  See their activity

  • Posts

    1030

  • Joined

  • Last visited

 Content Type 

Everything posted by garrygt

  1. garrygt
    I've got a set mate
  2. garrygt
    I've got 2 mate. They are 150 new. 30 delivered
  3. garrygt
    Id say it would sort your problem out anyway if your on a budget. An external wastegate is the best cure but as you said its a waste of money getting a ct9 set up. Should solve your problems for now mate
  4. garrygt

    idle control valve

    garrygt replied to gt-nick's topic in Wanted

    I've got one buddy.
  5. garrygt
    http://www.ukstarletowners.com/topic/41421-anyone-ever-passed-an-mot-without-your-cat-on/?fromsearch=1 here you go mate. Took a while but i found it. Have a right read through that it might help you out
  6. garrygt
    Id measure the wastegate penny then use the dremmel to bore the hole leaving a few mm either side. Just take your time and keep checking and you will be fine
  7. garrygt
    You need a specific one for the ep82 and ep91. Its made by ap engineering who altered the ecu to fit starlets. As apexi never made a power fc for a starlet themselves i believe. I've got one for my 82 great ecus. Very cheap price compared to a starlet too haha
  8. garrygt
    Port the wastegate mate. That should solve your problem. Also if funds allow buy a hks actuator. Second hand can be quite cheap. Its an easy job to port the wastegate aswell.
  9. garrygt
    You dont need a emissions test for this car. Theres a thread on here somewhere with a way of getting round it. I think you ask for an engine specific emissions test but the 4efte isnt on the uk database, so they have to do a non cat test. Have a search and see what it says.
  10. garrygt
    Your best bet would be to buy the fittings yourself and take them to your local welder. Costs about 30 all in maximum if you already have a rocker cover. You can get the fittings on the allspeed website.
  11. garrygt
    Bump
  12. garrygt
    Bump
  13. garrygt
    Bump
  14. garrygt
    I've got a set mate
  15. garrygt
    Did you get this sorted?
  16. garrygt
    Up
  17. garrygt
    Up
  18. garrygt
    It would mate yes. I was in a hurry so just took pics as soon as it came off.
  19. garrygt
    You would need a 90 degree bend and 2 silicon joiners. It wouldnt be hard atall. As with many parts for these cars, you find a way to make them fit. Fitting this though is a piece of cake
  20. garrygt
    No these are out of a forged glanza thats been up in scotland for years now.
  21. garrygt
    Its not too short atall, at the bottom of the pipe there was a silicon joiner and then a 90 degree bend. Worked fine on the car and will be way shorter than your blitz kit.
  22. garrygt
    Bump
  23. garrygt
    Bump
  24. garrygt
    Buuump
  25. garrygt
    Seems like a load of shit to me to be honest. Theres not a chance a gt30 would fit behind a standard rad, also in the first pic the car has abs. Surely the car in the last pic never came with abs? Especially as it started life as an N/A
×
×
  • Create New...