Alright lad. Nice to see a EP82 on here. I just put my parts in a basin of water and used a very fine grade wet and dry paper to sand it down. Then primed it and sprayed it with plasticote white, no point tryin to match up the paint as its a bit yellow at the mo'. wee tip is to spray the corners and curves first then work your way round the rest. Also spray in a well ventilated area but make sure its nice and warm. The spray cans work best at 26 degreesC +. Hardware and DIY stores sell really good hardwareing paint. The stuff i used was for sprayin kitchen chairs and stuff.