Arnold Posted August 1, 2016 Posted August 1, 2016 I've finally installed my AEM wideband to my car and on boost, i'm getting readings as low as 10.0. That's the lowest the dial will report. I've heard 11.5 sounds about fine, but 10.0 is obviously way too rich right? She's got an E-Manage Ultimate fitted Quote
starletezy Posted August 1, 2016 Posted August 1, 2016 thats very rich better than running lean though would get it checked by your mapper Quote
5e colin Posted August 1, 2016 Posted August 1, 2016 maybie your car is just mapped that safe in the 10S and nothing wrong with wideband ??? Quote
triple j Posted August 1, 2016 Posted August 1, 2016 If its in the 10's on boost there wouldn't be much power to be had as it would be on the verge of bore wash and she would be bogging down on u,what's it reading at idle. Quote
Ollieh17 Posted August 1, 2016 Posted August 1, 2016 Standard ecu on mine went down to the tens Quote
triple j Posted August 1, 2016 Posted August 1, 2016 Its very rich, but saying that I never saw the stock ECU's afr on boost. Quote
patman Posted August 1, 2016 Posted August 1, 2016 Have standard ecu in my GT, have a sard fpr on only running 0.8 bar for now, (till got time to change things) anyway I find dropping the fpr down to around 2.2 bar, I get around 11.0/11.2 on WOT that's in 4th of course, so obviously these standard ecu's are made to run rich. Quote
Arnold Posted August 2, 2016 Author Posted August 2, 2016 Idle is around 14, it fluctuates a little. She drinks fuel on boost so yeah it's probably just very safe! I'll go get her checked out Quote
morgey Posted August 2, 2016 Posted August 2, 2016 Was at a dyno day a year or so back and a mates n/a fezzie st was in the 10s (stock 😂), the operator reckons he'd only expect to see a car with low 10 afr's if it was a drag car or very high performance. Quote
_JT_ Posted August 11, 2016 Posted August 11, 2016 My wideband reads 10.0 on full boost 4th gear. Mapped by TD and it's never missed a beat. On EMB that's how they set them up Quote
triple j Posted August 11, 2016 Posted August 11, 2016 (edited) There would be a major hike in power leaning out from 10afr to a still safe 11.0/11.5 on boost, u can feel the difference from the seat alone, one thing u would be sure of is not getting det with the 10.0afr bore wash. Edited August 11, 2016 by triple j Quote
RobSR Posted August 11, 2016 Posted August 11, 2016 When mine was mapped by TD it taper'd down to low 11's, every now and then i saw a high 10. They will go rich on a standard engine top end to stop them destroying themselves. Quote
5e colin Posted August 11, 2016 Posted August 11, 2016 My wideband reads 10.0 on full boost 4th gear. Mapped by TD and it's never missed a beat. On EMB that's how they set them up i only set my afr in 3rd gear Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.